Jump to content
SAU Community

Recommended Posts

Hey guys as topic states i'm looking at selling my car to free up some cash. It is currently unregistered but i could easily get it roadworthied and registered if somebody were interested. Needs another $2-3k put into the body to be looking mint however i dont have the time or money to spend on it. Will put some pics up tonight and update the parts list with prices as soon as i get a good idea of what they are worth (feel free to make an offer in the meantime). Whole car $8k neg otherwise parted out (need to generate enough interest before i tear it apart). Parts are as follows;

- RB25det motor in excellent condition (done about 70,000kms)

- RB25det manual gearbox in excellent condition

- HD clutch to suit (unsure of brand, rated to about 700hp, cost me $700, had very little use)

- Strengthened flywheel to suit gearbox setup

- Short shift kit

- Microtech LT12S ECU with plug and play loom

- Garret 3076 Turbocharger

- Turbosmart 38mm pro gate w/ screamer pipe

- RB25 standard exhaust manifold ported and modified for wastegate

- 3'' custom dump pipe to suit

- hi flow catalytic converted

- 3'' exhaust from cat

- HKS Hypermax 2 Coilovers

- 18'' Ozzy tires RS-GT wheels (black with chrome lip) all tyres in very good condition

- Superspark Coilpacks (Series 2)

- Siemens 680cc Fuel Injectors

- Bosch 040 external fuel pump

- 2L surge tank with fuel pump mounting bracket

- Chassis has 95,000k's on it and needs a little bit of love

- have all of the other interior and exterior bits and pieces

Feel free to contact me on 0439 930 151 if you have any questions.

Car is located on the southside

Link to comment
https://www.sau.com.au/forums/topic/393205-1995-r33-gts-25t-for-sale/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...