Jump to content
SAU Community

WSID this wed (28/4)

SLY33

By SLY33,
in Events Archive

 Share

Recommended Posts

SLY33 Mentor

SLY33

Posted
Posted

hi guys, after my first WSID experience last week im looking forward to getting back this wednesday.

Wondering if any of you are going to race also? Last wed there was only myself and R33vit! (Cmon Sam, back out there, i have RE540's now :()

***a HUGE thanks to MIN71E for the semi slicks!***

if i dont get a 12 i will be very unhappy, as with the winter schedule taking over after this meet, this is gonna be the last chance i get to attend!

Link to comment
https://www.sau.com.au/forums/topic/39415-wsid-this-wed-284/
Share on other sites
R33vit Experienced

R33vit

Posted
Posted
Wondering if any of you are going to race also? Last wed there was only myself and R33vit! (Cmon Sam, back out there, i have RE540's now :))
I will do my best to be there to run you dude :P
if i dont get a 12 i will be very unhappy, as with the winter schedule taking over after this meet, this is gonna be the last chance i get to attend!

If you dont get a 12 Im going to slap you:bonk:

Link to comment
https://www.sau.com.au/forums/topic/39415-wsid-this-wed-284/#findComment-802331
Share on other sites
 Share
Go to topic listing


  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...