Jump to content
SAU Community

Recommended Posts

SOLD!!!

I've got these wheels on my GTR at the moment but they have the wrong offset and so I'm using bolt on adapters. These wheels will suit a GTS-T or 200sx, 300zx etc.they are less than 6 months old and do not have a mark on them...They have dunlops 265/35/r18 on them with about 50% tread. I'm willing to sell wheels separately without tyres....

$2000 with tyres...

$1600 without tyres...

Link to comment
https://www.sau.com.au/forums/topic/39628-18-x-95-shadow-chrome-deep-dish-rims/
Share on other sites

The wheels are 18x9.5 front and rear and exactly the same offset, although I don't know what the offset is ??? I've had them for about 6 months and I bought them cause they look awesome but unfortunately would not fit a R33 GTR, so I am currently using a bolt on adapter....

I will also consider swapping them for wheels that would bolt straight onto a R33 GTR...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...