Jump to content
SAU Community

X8 Rota Gtr-D 18X9" And 18X10" With 235/40/18 Achilles Tyres

GHOSTrun
 Share

Recommended Posts

GHOSTrun Mentor

GHOSTrun

Posted
Posted (edited)

I have the following pairs of wheels with tyres for sale:

Brand new black Rota GTR-D's with brand new Achilles tyres

1. x2 5x114.3 18x9.5" +12 with 235/40/18 - $600

2. x2 5x114.3 18x9.5" +12 with 235/40/18 - $600

3. x2 5x114.3 18x10" +12 with 235/40/18 - $600

4. x2 5x114.3 18x10" +12 with 235/40/18 - $600

461688_10150667878203945_588173944_9071013_132180180_o.jpg

Notes:

- selling rims with tyres only, not stripping off and selling seperate

- not negotiable on price unless you want to pay more

- pickup from Brisbane city

- can deliver for $20 to brisbane local or $60 to gold and sunshine coasts

- can send via courier with tracking number and insurance for $60/pair

Contact Michael on 0413504084

Edited by GHOSTrun
GHOSTrun Mentor

GHOSTrun

Posted
  • Author
Posted (edited)

Hey Robbie, did some digging for you, this is what 18x9.5" +12 look like on stock R32 GTR guards,

R32GTR.jpg

This is 18x10" +15

100_0278.jpg

They are slightly inside the guards, so I'm pretty sure the 18x10" +12 (3mm difference) will fit fine :)

Edited by GHOSTrun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...