Jump to content
SAU Community

R33 Gtst Rb25/30 458Kw Rare Hard To Find E85

moegtst
 Share

Recommended Posts

moegtst Enthusiast

moegtst

Posted
Posted (edited)

Hi All

Up For sale is my 1994 R33 GTST Nissan Skyline with RB25/30 hybrid 458kw (614hp) at the rear wheels Rego till September yes that's right this is a street registered car with no defects

The reason why i am selling this is that i need the money for a house and time to sell my toy.

The skyline has been always garaged ever since i have bought it and only came out once every 2 weeks or on cruise nights or days with the boys at JEM.

The Skyline has a plenty of mods

Engine:

RB30 bottom end worked and forged, a RB25 head with vavle springs and standard cam and VCT for better response, Genuine Greaddy Plenum with a 70mm throttle body for quick response, aftermarket Greedy Alloy Radiator, HDI From Mount Inter-cooler, Turbo Smart Blow Off Valve, Haltech E11V2 Aftermarket Computer with 2 step anti-lag Button, Super Spark Coil Pack, Relocated Oil Filter, 2000cc Bosch Xspurt injectors (exactly the same as the Injector Dynamics), Aeromotive A1000 fuel reg PN 13109 handle up to 75 psi, custom 13 mm Fuel Injector spacers, top mount fuel rail (2 in and 1 out), GT3540R turbo Vband, top mount manifold with 50mm gate and screamer pipe, ARP Head studs, Metal Gasket, custom made air filter pipe and oil catch can which is plum back to the sump.

Fuel System:

1 x Bosch 044 In-tank fuel pump, 2 x Bosch 044 external pumps, 1 x 2.5 litre surge tank, 2 x Dash 8 feeds to fuel rail, and 1 x 1000 hp Fuel reg with Retuns Dash 6

Fuel Type:

E85 Caltex Eflex (105 Octaine)

Suspension:

Drag - Stock, Circuit - Tiens, Street - Bilstiens, Hicas lock bar all rear control arms changed for better traction and control

Tyres:

18 inch Mags with Federal Semi Slick for Street will get measurements later

Pair 16x8 ET Street Raidials Mickey Thompsons For Street or Drag

Body:

GTR Wing, 400r Side Skirts, 1.5 M SPec Front Bar, Standard Rear bar with GTR Pods

Color:

Black

Internal:

GTR R32 Seats, Autotechinica Sports Steering Wheel, 2 Step Antilag Button, Greedy Boost Controller, Turbo Timmer

I have put in a lot of work and effort in this skyline and made sure that it was well looked after and driven only a few times a months. The Cluster is saying 198,000 but the engine has been re-built about 10,000kms ago, There was nothing wrong with it but i just thought it was time to give it new internals and re freshen the engine. I just recently changed the fuel system over to e85 and as a result of the change i was able to produce 458kw at 24 psi of boost yes that's right 24psi boost for a engine that still has Standard cams WOW.

The only thing left in the car is a really good paint job but every-time i had the money i spent it on the mods on the car so whoever buys it will need to give it a full respray back to black but not the engine bay i made sure that was painted while i had engine out. I can help with someone who will respray the car between $1500-1800 so up to you if you buy the car.

Now i must let you know that know that this car is not for the faint harted, joy riders or test pilots. You will come and have a look at the car and if you show me that you want to purchase the car then i will take a deposit and then take you for a drive. I don't want to sound rude but please understand that this is a very fast car, i did 130mph (210 kms) down the quarter, this means its a 10 sec car ask any one if you don't believe me plus i have the papers to prove it as well.

So i am guessing by now you want to know the Price after all that rant well i would like $23,000 ono Also Happy for swaps for Somthing of Interest and Money my way or yours

I have put some photos up and will put on some more up later

if you have any questions please feel free to PM me or call on 0405942465

Pics.docx

post-87183-0-76079200-1333497405_thumb.jpg

Edited by moegtst
moegtst Enthusiast

moegtst

Posted
  • Author
Posted (edited)

so what time did you actually run down the 1/4 mile then?

Had wheel spin first and 2nd and boged on 3rd went down 14 sec @130mph

i jumped 36mph from half track.

Edited by moegtst
moegtst Enthusiast

moegtst

Posted
  • Author
Posted

Sorry guys i have been having troubles loading pics so its on doc format instead with pics if you want more just sms me adn ill text it through

skyline.docx

moegtst Enthusiast

moegtst

Posted
  • Author
Posted

oh shit sorry mate just so much replies n none of them about the car it self...i didnt expect that somone would use my advert to advertise there stuff

  • 2 weeks later...
moegtst Enthusiast

moegtst

Posted
  • Author
Posted

hi all i have a suprise the beast has a new shiny paint job now so what this means is that the car is complete nothing to do except sit n drive.....not sure if i mentooned it has rego till sept n dpesnt have any defects pleasesg for pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...