Jump to content
SAU Community

Seemed To Fix One Problem.. Need Help Eliminating The Last One.

willzgtst
 Share

Recommended Posts

willzgtst Contributor

willzgtst

Posted
Posted

ok, so i have fixed the issue of the car stumbling and stalling after 20 minutes by adjusting the TPS, and replugging it in firmly has seemed to vanish the problem. Now i have some other retarded problem.

when im driving, it doesent cut out its more when u plant the foot down and gear change i cop a power cut every now and then.

is this the AFM being a Cvnt ? or is this spark plug related ?

its not anywhere near as bad as it used to be, i would love to be able to Eliminate the problem

btw its an auto.

willzgtst Contributor

willzgtst

Posted
  • Author
Posted

boost is nun spec. ( stock ) LOL

plugs are ok and coil pack is fine.

i got it booked in next week for a diag, and then a service also. so if i dont figure it out by then

ill have another look at the coil packs for any wear. but other than that i could probably say my AFM is a non nissan and its buggered...

thanks defari.

R33 Gts-T Sedan Explorer

R33 Gts-T Sedan

Posted
Posted

oh, xD Same thing happen to my car. I changed the coilpacks and it is all fixed. The coilpacks must have cracks that allows some of the sparks leaked out. Correct me if I'm wrong but it is one of these:

Spark plugs

Spark plugs leads

Coilpacks.

cabramatta Community Regular

cabramatta

Posted
Posted (edited)

Do you have a blow off valve ?

I blocked mine off which removed this problem, but along with that I also cleaned my coilpacks and siliconed them up.

Regapped plugs.

Open the AFM and check out the solder joints, if they're dry, then re-solder them.

If it occurs in gear change (meaning no load) wouldn't this remove the chance of it being a coilpack issue ?

Cooler piping, vac leaks etc.

Edited by cabramatta

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...