Jump to content
SAU Community

FS: Highly Modified 1995 S1 R33 GTST - Sydney

sidewaymambo
 Share

Recommended Posts

sidewaymambo Mentor

sidewaymambo

Posted
Posted

Hi All..

I really don't want to sell this car, and even ingore wife's plea ..but now I have accepted an offer to work in oversea for 2 years (from March, 2005), and really have to sell.

2002 Imported, 62000KM was on the clock, now 78000KM.

It was total stock when I import back in 2002 ($22000), after years of saving and modified by sounded performance workshop in Sydney / Waterloo, all receipt available for inspection.

Looking for $28500 . Please PM me for detail or email me sidewaymambo at hotmail dot com, PICs available upon request. 0403228883 Phillip

Dyno sheet can be provide upon request

Spec as following:

1995 R33 S1 GTST, Dec built, Burgandy, Manual, regular service every 5000KM Mobil 1 only, timing belt / transmission oil/ LSD oil changed at 75000KM service.

ECU/Engine/Exhaust

Ported Head / valve

TOMEI 264 IN/EX cams

TOMEI adjustable exhaust cam gear

APEXi Power FC with H/C

APEXi RSM + shift light

GREDDY type R Blow Off Valve

GREDDY ProfecB boost controller

GREDDY Oil catch can kit

GREDDY engine oil cooler kit

GREDDY intake plenum

GREDDY Iriway 8 Iridium spark plug

Q45 90mm AFM

Q45 90mm Throttle body

NISMO Oil Cap

TRUST TD06-25g Turbo kit inc:

TD06-25g 16cm^2 Turbo

TRUST No'8 wastegate

TRUST exhaust manifold

TRUST Front pipe

NISMO 550cc Injectors

TOMEI R33 Fuel Pump 250L/H

NISMO Fuel Regulator

TRUST 3" front pipe and high flow catalytic converter

FUJITSUBO Cat-Back Exhaust

Suction and Cooling

APEXi Power Intake

TRUST V-SPL Intercooler kit: 600x300x76

custom stainless steel piping

Drivetrain

C's Quickshift kit

OS Giken twin plate clutch set (new installed by Bel, 500KM only)

NISMO big bore slave cylinder (make twin plate feel like stock)

Handling

TOMEI Brake Master Cylinder Stoper

FET Tower Brace (F)

CUSCO Tower Brace ®

DBA drilled / slotted disks (F,R)

Bendix advance / EBC brake pads (spare)

Motul 600 Racing Brake Fluid

Falken Azenis RT/215, 235(F) 255® 80% meat left

Belstien Shock / Whiteline spring

Section HICAS Lock Bar

Urethene suspension bushes (F&R)

Whiteline Handling pack (Full set)

Interior

APEXi EL Mechanical Boost Gauge

GREDDY Gauge POD

FET Turbo Timer

MOMO Steering Wheel

After market gear knob

Pioneer 5550 MP3 Head Unit

Pioneer 6 1/2" splits Speakers (F)

Pioneer 6" ®

RAZO pedal set

Mongoose M-M80 3 alarm + 3 points immobiliser

Exterior

R33 GT-R Style Front bar

R33 GT-R style front grill

R33 GT-R style bodykit

R33 GT-R Style Rear spoiler

Manaray 17" 6 spokes wheels

Steve Grand Master

Steve

Posted
Posted

It really hurts me when someone spends over $40 000 dollars on a car then sells it for less than the cost of the mods. Mainly because my car doesnt have as many mods and I have spend over $40 000

sidewaymambo, if you ever decide to stock the car out (highly recommended) and sell the bits, let me know, I could be very interested in your brake setup, very, very interested. Even might trade for some stockers with endless pads

Free bump

sidewaymambo Mentor

sidewaymambo

Posted
  • Author
Posted

Thanks, steve..I have set a dealine..if nothng happened..I will stocked the car..and you will on my top list..

do you still got the factory turbo setup with dump pipe, in/ex cams....just a ask..

cheers,

mist Community Regular

mist

Posted
Posted

heh we're all in the same boat... I've a $50k R32 GTS-T. Philip is being a good dad these days, so he's selling this awesome R33... i'll probably put my car back to stock too b4 selling next time unless someone is prepared to pay decent money

free bump :)

p.s. don't sell b4 we go EC / wakefield together ! havent run with u yet heheh

  • 1 month later...
  • 2 months later...
sidewaymambo Mentor

sidewaymambo

Posted
  • Author
Posted

I feel sad to put this ads, but that's life..trying to be a good husband / dad..

price updated..

heh we're all in the same boat... I've a $50k R32 GTS-T.  Philip is being a good dad these days, so he's selling this awesome R33... i'll probably put my car back to stock too b4 selling next time unless someone is prepared to pay decent money

 

free bump :D

 

p.s. don't sell b4 we go EC / wakefield together !  havent run with u yet heheh

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      What about if you just give it direct 12v and earth?
    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...