Jump to content
SAU Community

RB20DET won't start....help?

RiverSide

By RiverSide,
in Engines & Forced Induction

 Share

Recommended Posts

RiverSide Proficient

RiverSide

Posted
Posted

After tidying up my intercooler piping, and fitting everything back up. i tried to start the vehicle and it won't run........it has fuel, (can smell it) and must have spark cause it threw a bigass flame out the pipe.

What would cause this? I have triple checked for leaks in the piping, i have checked to see if i knocked a plug or similar, but all looks good.

I am at a wits end. The car was running just prior to removal of piping.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/39766-rb20det-wont-starthelp/
Share on other sites
RiverSide Proficient

RiverSide

Posted
  • Author
Posted

Got it sorted today..........turned out to be fouled plugs from turning the engine on and off while filling the power steering fluid after rack re-co.

Gave them a clean and runs sweet as now.........definately time for a tune though, it seems the car is running awfully rich.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      GTR front looks good. If you don't like it, I'll swap you a rolling shell R33 for it. Give you a fresh base to start with.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      soon I also prefer the old look. At least I have more clearance for wheels up front now.
    • MBS206
      SAU History 101

      By MBS206 · Posted

      @PranK I think a few links in the original post need fixing...
    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
×
×
  • Create New...