Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Do you sell these with a fitting kit to suit a 1986 rx7 fc3s by any chance?

We don't stock specific kit's as yet but it does come with 2 strainers so that won't be a problem at all.

Whats the difference between 341 and 342?

Hey,

341 has an offset fitting 342 has an inline one. If not sure go with the 342 it's the most common one.

- Brendan

Do you know which kit would suit a S2 C34 stagea? The 341??

Hey,

In most cases the GSS432 is used (inline fitting) on all the Skylines (RB's) so I would say go with that one unless you require the offset fitting.

- Brendan

  • 5 months later...

Hi mate,

Wild stab in the dark but is this offer still available?

Oh yeah! Still in stock and ready to go.

Correct they are mufti-fit and come with 2x strainers to insure there is nothing they won't suit. :yes:

I got my package today thanks!

DSC_0139_zpsf5f2e407.jpg

When I got the box, it was loose. Is this everything I need? There were no instructions in the box?

That's it mate, 2 strainers terminals socket and fittings - it's all there.

These are universal kit's so installation instructions are not supplied, will depend on what you will be fitting it.

In most cases it's a straight fit with no fuss :thumbsup:

  • 2 weeks later...
  • 4 weeks later...
  • 1 year later...

At a fraction of the price of a new Nissan fuel pump, why not upgrade at the same time & save some big $$$





  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...