Jump to content
SAU Community

Recommended Posts

Hi guys - might be a newbie question but a friend of mine is looking for a spare wheel as he doesn't have one in his car. The tyre place told him that the PCD is 4x108 (first time i've heard of that PCD also :P). I'm searching for spare tyre/wheel combos online and I can't seem to find any in that PCD. Most of them don't mention the stud pattern, just say 4 stud or 5 stud.

Do i specifically need to get a 4x108 or can I just get any 4 stud wheel? I have a feeling it has to be the specific one, if so - any ideas what a good place to get one would be? Tyre place said they don't have one.

Thanks for your help :)

Link to comment
https://www.sau.com.au/forums/topic/398355-quick-spare-wheel-question/
Share on other sites

ok so turns out its a ford fiesta 2010 (its a 19 yo chick, don't ask me why she said Toyota first) lol. Now according to the dealers, these cars don't actually come with a spare wheel! They're asking for $500 for a spare wheel and a jack lol.

The PCD is 108, i've Googled :) ... so now do I specifically need to get a 4x108 wheel? (again, sorry if this is a stupid question)

Thanks again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...