Jump to content
SAU Community

Apexi Power Fc Boost Control Kit (415A013) To Suit Skylines/s Chassis/wrx/evo

philmak
 Share

Recommended Posts

philmak Experienced

philmak

Posted
Posted (edited)

Apexi Power FC Boost Control Kit off my nissan S14a.

PFCBOOSTKIT-415A013

Has been used for about 1 year now, selling the car so no need for this.

The Apexi Boost Control Kit is an optional kit designed to control boost through the Apexi Power FC. Simple connection to the Apexi Power FC allows the user to access a full self-learning boost controller. The Apexi Power FC allows up to 4 different boost presets for any stage of driving. The high grade solenoid valve is the same one used in our Apexi Super AVC-R boost controller. As with the Apexi AVC-R, the Boost control kit allows increased boost response and boost stability at high RPM's

Also suits:

Nissan Silvia - PS13 (Red Top)

Nissan Silvia - S14 S2

Nissan Silvia - S15

Nissan 180SX - RPS13 S2 (Black Head)

Nissan 180SX - RPS13 S1 (Red Head)

Nissan 180SX - RPS13 S3 (Black Head)

Nissan Skyline - R34 GTT - ER34

Mitsubishi EVO CP9A

Mitsubishi EVO CT9A

Subaru Impreza - GC8/GF8 Ver3-4

Subaru Impreza - GC8/GF8 Ver5-6

Comes with original box, Apexi boost solenoid, cable to Apexi Power FC and 1 meter of vacuum hose (not pictured)

_DSC1451.jpg

Condition: Used

Age/Mileage: 15,000kms

Price: $ 300 (RRP at justjap is $730)

Edited by philmak
krayzie32 Mentor

krayzie32

Posted
Posted

Do u no if this would suit a r34 gtr ??

Nope you need

BCK 415-A001

http://justjap.com/store/product.php?productid=18036

These are more common to find second hand.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...