Jump to content
SAU Community

Recommended Posts

1983 DR30 Skyline RS Turbo ‘Ironmask’

2.0l FJ20ET

5 Speed manual

New Daiken clutch

Midnight Purple

Jenesis Front spoiler extension

15 x 6.5 SSR Formula Mesh Alloys

Cusco Adjustable Camber Tops

Cusco Adjustable Front Strut Brace

Lowered suspension

Hi-flowed FJ20 Turbo (T3)

3” Kakimoto Exhaust (Dump pipe back)

Front mounted intercooler

GREX Oil Cooler with remote oil filter

VL Turbo Fuel Pump

GReddy ‘PRofec A’ Electronic Boost Controller

GReddy Turbo Timer

GReddy Adjustable Pressure Relief Valve

PROF Sheepdog Adjustable Blow-off valve

Pod Filter

Mines Ecu

Kenwood CD/Tuner/Tape

Bride Fixed Race Seat

Half Cage

Pivot Shift Light

Ultra Speed meter

Trial ash tray (best mod)

GReddy 60mm Electronic Boost Gauge (2.0bar)

OMORi 45mm Oil Pressure Gauge

OMORi 45mm Water Temperature Gauge

OMORi 45mm Oil Temperature Gauge

OMORi 60mm Exhaust gauge

Spares:

-R200 LSD

-FJ20 Turbo/Exhaust manifold/dump pipe

-Inlet manifold/throttle body/fuel rail

-Standard FJ20 ECU

Just had low km FJ20 fitted, with compression report.

Will require ADR compliance and rego

$8500

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/39914-fs-purple-dr30-rs/
Share on other sites

Bump!

I have personally seen and driven benny's DR30 on numerous occasions since he imported it....A very unique car, it really looks fantastic in the midnight purple -

the pics don't do it justice though, here's some better ones. :)

good luck with the sale benny!

Link to comment
https://www.sau.com.au/forums/topic/39914-fs-purple-dr30-rs/#findComment-822391
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...