Jump to content
SAU Community

Recommended Posts

As the tittle states i want to hit atleast 400 kw on all four wheels. I currently have 28/60R-5 turbo's in my set up.. with E85 will these puppies get me my goal? Ive been very tempted by the Garret GTX3582R so im not sure if i should keep the twins or go single?

-5's = 400awkw: Am i pushing the limits of the turbo?

GTX = 400awkw: Do i have more headroom to make more power down the track?

My setup is::

Forged R32 Bottom End (rb26dett)

Rebuilt R34 Heads (GT-R)

HKS 264 Cams

ISC Cam Gears

3.5 Exhaust (No cat or reso)

Haltech ECU

Pretty much all the bolt on's.. Now what im doing in the following weeks is competely upgrading my fuel system.

From this:

800cc Injectors

Bosch 040 Pump

Nismo Fuel Reg

To this:

Aftermarket Fuel Reg

ID 1600cc Injectos

3x Bosch Fuel Pumps

Surge Tank

Double Fed Fuel Rail

10mm Braided Fuel Lines

HKS 272 cams (not sure yet)

Haltech 4 Bar Map Sensor

Haltech Boost Controller

E85

The car is a 32 GT-R, currently making 350 on all four on 18psi (pump fuel). Either way iam going to do the mods that i stated up above. Just not sure on what turbo i should go with on that setup? Im going to try the 05's first if i cant get 400awkw ill definately be ripping them out and going Garret GTX3582R.

Cheers Sedat.

I forgot to mention: Im only into mid and top end power.. i want it to have alot of torque and power from 5000rpm onwards. Also im not sure if i posted this in the correct section lawl.

Edited by Sedat
Link to comment
https://www.sau.com.au/forums/topic/399727-going-for-400-kw-atw/
Share on other sites

I'll give you the benefit of the doubt and assume you've not tried searching...

Because all you need to do is read the 400kw thread, or simply the RB26 dyno thread.

You'll see people, many people, have put 400 down with -5s and E85...

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...