Jump to content
SAU Community

Recommended Posts

I have R33 1996 GTST series 2 my passenger side central locking and power window both malfunction. I tried the switches from the driver side and it doesn't do anythings at all. I checked the fuse for power window at the front it is intact. What can cause this issue? is there a fuse for just the left hand side door? By the way the right hand side working fine both window and lock working properly.

Usually it has to do with the power window amplifier in the door that fails to operate. If its broken then youur cannot operate the window. if you have mates with a 33 see if you can borrow one to test.

Not 100% sure on 33s, but im going off my c33 laurel, most jap stuff is the same.

Does the window go up with the passenger side control?

Generally central locking is controlled by the master unit. But in saying that, if the master unit is broken, you should still be able to power the window with the passenger side.

Is the window up at the moment or stuck in the down position?

Hi man, ive got a R34 GTT so might be a little different but i had to replace the passangers side speaker the door card is pretty easy to get off just a few screws and then lift it up, the window power unit is just a little box attached to the door card one of the wires might have come loose or even got water damaged, maybe pull the door card and have a look.

goodluck Brent

The window stayed up not moving, no clicking sound and the central lock just dead and no clicking sound at all

Sounds like a dead/water damaged amp or lose plug/wire.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...