Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have to clean out the garage so selling a few sets of rims.

All are quality Jap rims, No Chinese or Thai copies.

1st Set are:

Stern AXIA 17x8 and 17x9 staggered rims.

Very similar to Work VS XX

ET +36 all round

Front tyres are 85%

rear tyres are 35%

Including centre caps

5x114.3

$1650.00

2nd set

Volk Rays Engineering TE37's

17x7.5 all round

Offset is +30ET

Carbon Fibre centre Caps

Rays blue anodised Valves

2 x Bridgestone Potenza GIII 215/45/17 with 75% even tread

2 x Yokohama Advan S-Drives 215/45/17 with 90% even tread

One of the rims has a small mark on one of the spokes but no biggie.

Great rims as we all know and very light.

Dont really want to sell them but I am not going to be using them any time soon so Someone give them a good home.

They will fit the following cars:

Subaru WRX, Liberty, Legacy, Toyota Celica, Early Camry/Holden Apollo and Audi A3, or any other car that is 5x100

Dropping price of these to $1850. (VERY HARD TO GET IN THIS STUD AND OFFSET!!!)

3RD set:

Nissan 350Z rims

17x7.5 and 17.8

+30 and +33

Great fit to any nissan 5 stud.

Front tyres need replacing and rears have 70% tread (Bridgestone potenzas)

$750

4th set

I have a staggered set of Jap rims for sale. Unknown brand but look like early Volk rims

They are 2 or 3 piece rims, I havent pulled them apart so not sure

They are 5x114.3 PCD

17x8 fronts offset 32mm

17x9 rears offset 36mm

These are a great lightweight rim

Tyres are only good for skids so the rims are advertised as is with free tyres.

$550.00

Prefer pick up from Upper Mount Gravatt QLD but I can post these rims to you if interstate at your expense through smart send.

PICS

Stern AXIA's

AXIA1.jpg

AXIA2.jpg

axia3.jpg

AXIA4.jpg

IMG_0819.jpg

IMG_0820.jpg

IMG_0818.jpg

IMG_0817.jpg

IMG_0816.jpg

IMG_0815.jpg

TE37's

volk1.jpg

volk5.jpg

350Z Rims

IMG_0821.jpg

Unknown Jap rims

17inrims.jpg

Link to comment
https://www.sau.com.au/forums/topic/402194-rays-volk-sterm-350z-jap-rims/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...