Jump to content
SAU Community

Melbourne Only - Gtt Manual 5 Speed Gearbox 87,000Ks, 350Z 18" Track Wheels, R32 Gtst Arc Inductionbox, Hks Kansai Front & Rear Strut Braces


Recommended Posts

Hello all,

For sale is a 1999 R34 GTT manual 5 speed gearbox with 87,000ks on it. Selects all gears, perfect condition any inspections welcome!

Bought it as a half cut can provide recipes total of $5,000. Only reason it's for sale is because iv gone a different direction with my build and unfortunetly I don't have the funds to get the box installed.

Price - $1,000

For sale - 4 x 5 stud 350z track wheels + bridgestone tires 40% - 60% tread. Bit of gutter rash & 2 centre caps are missing

Aluminum Alloy

Front

Size: 18x8.0

Offset: +30mm

Weight: 26.56lbs

Tire: 225/45-18

Rear

Size: 18x8.0

Offset: +30mm

Weight: 26.56lbs

Tire: 245/45-18; 265/35-18 will also fit

I paid 650 for these wheels & I know they go for a lot more!

Price - $450

For sale - 4 x 4 stud SSA 19" racing wheels (4 STUD)

Looked mean as on my r32 when it was 4 stud lol. Comes with 225/35 low profile tires on the rear 80% tread. No tread for the fronts - (N/A s13,s14,s15,r32,r33)

I payed 1,350 for these

Price - $500

For sale - R32 gtst ARC inductionbox

Price - $300

For sale - R32 gtst HKS Kansai front & rear strut braces

Price - $350

All prices are firm no offers, pics will be uploaded once I jump on the computer, for those that can't wait pm me your number and I'll MMS the pics via phone.

I'm located in Melbourne S.E - no postage pickup only I can delivery Melbourne & surrounding areas :)

Also OEM r34 gtt stuff will be added once my upgrades are done on the engine!

Cheers Johnny.

Not a problem there's plenty selling on the forum champ! Good luck hope u get one! :)

Bump!

There's been a lot of intrest just no one upfront with the $$$$

On a quick note the prices are firm, so please no more Husselers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...