Jump to content
SAU Community

Recommended Posts

As some of you may know I've been having lots of fun with my car lately

To get my car back on the road I need a replacement stub axle, to be precise I need the shorter of the 2 stub axles, anyone got one I could buy or know where I could get one as I'm not having any luck with the wreckers that I have called so far

I'm sightly baffled as to how I have ended up in this situation to begin with

Now to recap why I am baffled

My cars an auto V35 which "should" have been running an open diff just like every other V35 auto out there. Im pretty sure that my old diff was an open one because of the way it behaved around corners and how it seemed to light up one of my rear tyres when I took off quickly from a standstill

With that in mind I ordered a Quaife diff that was suited to the US base spec 350z which runs an open diff just like my car or so I thought

When the diff arrived and the install went ahead I ran into a problem where the longer stub axle was too long to fit into the new Quaife center and after searching the net came across Quaifs own solution of chopping off part of the longer axle to make it fit. Which up until now has worked fine

With more research it seems that the US base spec 350z which runs an open diff uses 2 equal length stub axles that fit perfectly into the quaife diff that I ordered to be a drop in replacement

The VLSD models run 2 different length stub axles in which case you order the diff for the VLSD equipped car and it bolts right up with the different length axles or you get the diff for the open diff 350z and do the chop on the longer stub axle like I ended up doing or you buy a shorter stub axle from a open diff 350z and replace the longer stub axle with the shorter one

Whats got me scratching my head is why has my auto V35 got the same stub axles as a VLSD equipped car ?

Anyone else got an auto V35 and pulled out the diff and noticed what the stub axle situation is?

Link to comment
https://www.sau.com.au/forums/topic/404363-v35-diff-weirdness-need-stub-axle/
Share on other sites

there is a place here in Melbourne where they have 3 V35s. You might wanna give them a call and see what is available.

Let me find the website.......there it is

they have V35 have a look at the website http://www.niss4x4.com.au/

Also try this one which is in Sydney, they sell new parts http://justjap.com/store/home.php

I hope it helps mate.

Thanks for the post Nismo

I found niss4x4 last night didn't know they had V35's until I had a look just then. I paid for and asked them to send me the short stub axle out of one of the 350zs at about 4pm today. Hopefully they haven't pulled it out of the 350 as I'm still not 100% sure if its even the part that I need

Have quickly shot them an e-mail and asked them to pull out the shorter stub axle from one of the VQ35 powered V35s instead. Will give them a call in the morning to follow up the e-mail I sent

In other news I got a call today from my mother telling me that the auto box in her S13 had gone BOOM! whilst driving 500m away from her house. The workshop she went to wanted $1500 to replace it what a joke! 2nd hand auto SR boxes go for free to $500

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • lights are on just the one click.  
    • Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...