Jump to content
SAU Community

Recommended Posts

Hello All,

Just completed an upgrade to my R33 GTR and have a few things for sale.

All items are located in Brisbane southside. Pickup preferred but postage might be available at buyers cost.

1. Stock intercooler 600 x 300 x 60 - $150

post-88064-0-87482800-1342834873_thumb.jpg

2. 2. Garrett stock twin turbos no shaft play good condition - $400

post-88064-0-31404300-1342834989_thumb.jpg

3. Apexi pod filters (4 months old) with air flow meter - $400

post-88064-0-21654500-1342835070_thumb.jpg

4. Haltech Platinum Pro ECU R32/R33 good condition - $1750

post-88064-0-03673700-1342835280_thumb.jpg

5. R33 GTR stock cams done around 90,000 - $175

post-88064-0-06261600-1342835414_thumb.jpg

6. R33 GTR Stock Injectors - $150

post-88064-0-81824000-1342835482_thumb.jpg

7. R33 GTR Stock Fuel Pump - $60

post-88064-0-41286100-1342835545_thumb.jpg

8. R33 GTR Stock Coil Packs - $125

post-88064-0-90779600-1342835608_thumb.jpg

9. Stock Air box - $200

post-88064-0-97018700-1342835666_thumb.jpg

10. Cam Gears - $40

post-88064-0-05006000-1342835712_thumb.jpg

11. R33 GTR Stock ECU - $150

post-88064-0-31669600-1342835755_thumb.jpg

12 Intercooler surround - $100

post-88064-0-28215800-1342835963_thumb.jpgpost-88064-0-66551200-1342835973_thumb.jpg

13. RB26 Cam gear cover - $50

post-88064-0-04740600-1342836016_thumb.jpg

PM me if interested all prices neg.

Link to comment
https://www.sau.com.au/forums/topic/405229-r33-gtr-parts-for-sale/
Share on other sites



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...