Jump to content
SAU Community

S15 - The Old 57Ing , Now With R33 5 Speed And Forged Engine Rebuild


Recommended Posts

2002 Nissan 200SX Spec R S15

Engine Mods

SR20DET - REBUILT WITH FORGED INTERNALS BY GAVIN WOOD (RECEIVED CAR BACK 19/07/2012) $6500 OF WORK.

Apexi Power FC + Apexi hand controller

Garret 2871R .64 rear housing, 56 trim

Stainless GKTech exhaust manifold

AM Performance screamer pipe

Tomei Cams 256/260

Tomei Cam gear, exhaust side only

GKTech Rocker Arm Stoppers

Nismo 740cc Injectors

Z32 AFM

Apexi Power Intake Pod Filter

Drift Oil Catch Can

Hi Octane racing hot air diversion plate

Front Mount Intercooler

Aftermarket big thick radiator

Just Jap Racing 19 Row oil cooler relocation kit

Blitz Blow off Valve

Apexi AVCR boost controller

Walbro intank fuel pump

3-inch stainless steel exhaust system to a HKS cannon muffler

Nismo Oil cap

Apexi Radiator cap

Driveline & Brakes

NOW WITH POWERTUNE R33 5 SPEED CONVERSION

C’s 5-speed short shifter kit

NPC Heavy Duty clutch

NPC lightened flywheel

DBA slotted rotors, front and rear

Bendix Ultimates

Suspension

Tein adjustable coilovers with adjustable pillow mounts ,( RAISED TO STAY LEGAL)

Fulcrum pineapple rings

Cusco front strut brace

Just Jap Racing engine dampener

Wheels

Work Meisters S1 3-Piece

18 X 8.5 +24

18 X 9.5 +30 (BRAND NEW REAR TYRES)

Exterior

STANDARD FRONT BAR PUT BACK ON FOR GROUND CLEARANCE

Nismo side and rear skirts

Interior

Apexi EL mechanical boost guage, mounted on A-piller, reads up to 2 Bar

Apexi turbo timer

Nismo gear knob

Pioneer MP3/IPOD head unit

Power

250rwkw's (335HP at the wheels) - OLD FIGURE IS CURRENTLY BEING RUN IN AND WILL BE RETUNED BY GAVIN WOOD IN 2000KMS

  • 1 year later...


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...