Rb25Det Tps Sensor Voltage Wrong?

[t304vkcalais]

so tested my rb25det tps tonight, im getting 14.18 negitive

5.78 postive.

and my signal wire is getting .63v at throttle closed and fully adjusted as far as it will go.

at full throttle im getting 3.78 volts, is my tps stuffed?

got a 4 inch throttle body on the forward facing plenum etc stock ecu at the moment etc.

any ideas??????

[DVS JEZ]

Adjust it so the signal has .4v

[Plattsy]

http://www.skylinesaustralia.com/forums/topic/404812-help-setting-tps-on-r33-s2/

here you go mate.

DVS help some one out with this and this is how i did it too.

[t304vkcalais]

mmmmmmm thats what mine is set at, still have troouble starting it when its cold, have to pump the throttle like crazy to get it to fire and even then it sound like it only just catches, runs like crap for a couple seconds then idles, just cleaned out the aac and blocked off the iac as i dont have any plugs going to it as its in a cefiro, should i run 2 new wires to this and run them to the computer?????

that could be my hard starting and high idle

?????