Jump to content
SAU Community

Recommended Posts

Good Evening Everyone,

It is time to part ways with my pride and joy and since I have had involvement in these forums, I might as well start by advertising here first. The reason why I'm selling is because I'll be provided with a company car and no longer have the space in my garage to keep her.

I have been the first owner since it was imported from Japan in 2010 and I have the import certificate to prove so.

The car itself has been maintained at a high standard by the team at Irevolution Imports in Bayswater, whom I believe are the best workshop and specialise in V35's as well as other exotic vehicles. The beauty of this purchase for those who are interested is that the car itself has gone through a major overhaul. When I purchased the car, it had done 65,000 km and now it is sitting at 110,000 km. The proof of km's upon purchase of this vehicle are shown on the import certificate.

(1) Engine rebuilt using Wiseco Forged Pistons and Eagle Rods, running 11:1 compression. I set this car up to be an NA car, but there is that option for those who wish to put a supercharger as this setup can easily handle it. The rebuild itself was done with Orger Engines in partnership with Irevolution Imports in March 2012. The top end has also been reconditioned. Only the best quality parts were used and I have receipts of proof. Timing chain, water pump, thermostat, crank/cam sensors and valve covers were also replaced.

(2) The engine itself was then tuned by RacePace motorsport in Bayswater. I used Osiris Uprev (the best plug and play tuning module for the infiniti g35 and v35) to tune the car to a safe 175RWKW on 98 Octane. I can provide receipts and dynosheets as proof once again. I'm happy to partways with the Osiris Software and cable at no extra cost for those who want to do further modification.

(2) Other parts that were replaced were OEM Exedy Clutch and Fidanza Lightweight Flywheel. Front compression bushes were also replaced. The back end axles were also re-lubricated and retorqued to remove than annoying noise common in the V35 or Infiniti G35.

In regards to cosmetics, it runs on 19x8.5 Vertec +35 offset Vertec Manaray Wheels and has been properly lowered using RSR downsprings and Nissan 'Red' sports shock absorbers.

In terms of sound, I've got Alpine Type R Speakers being driven by a 4 channel Alpine Amplifier. There is also an 8" subwoofer being driven by a 2 channel Cobalt Amplfier. An Xtrons head unit is what is upfront.

I should also add that it has a factory sunroof.

At the moment, it has a custom made axle back sports exhaust system, but I'm happy to part ways with a stainless steel y-pipe, 350z Intake Tube and Xforce High Flow Cats with minimal extra cost. I never had the chance to put them on.

I'm also happy to provide the OEM stock muffler and OEM 17" wheels.

Considering the work that has been done, I want to get $20,000, but I'm willing to consider other offers. I'll also be providing Road worthy certificate. The car itself has been registered until 30.11.2012.

I'll be posting pictures very soon.

I'm located in Victoria so PM me if you are keen.

Edited by Alphamox

Some pictures as promised. Some pictures show the engine out of the car's bay, the engine itself being pieced together, the factory sunroof and some pictures of the car itself in its glory. Im happy to provide other pictures to aide possible customers who are interested in this car.

post-78596-0-99962400-1343571753_thumb.jpg

post-78596-0-73105000-1343571836_thumb.jpg

post-78596-0-29285600-1343571870_thumb.jpg

post-78596-0-32587400-1343571909_thumb.jpg

post-78596-0-36312700-1343571941_thumb.jpg

post-78596-0-12665300-1343571974_thumb.jpg

post-78596-0-16819600-1343573959_thumb.jpg

Edited by Alphamox

I might put this thread on the FS private whole car section in Skylines Australia. Even though this thread has generated some interest, I think most of the people who troll this section of the forums already own a V35. Thanks to all who have provided me support.

  • 2 years later...

One question hope you could anwser for me please.

How is the Osiris Uprev the best tuning module for the V35?

Did the tuner explain or do you know the reason(s)?

Many thanks dude...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...