Jump to content
SAU Community

Recommended Posts

Hey guys I have here an R33 GTST im parting out or selling whole. The car has a broken timing belt so motor needs rebuild. Has turbo but turbo was blowing smoke and needs new seals. Car is a complete car and was registered up until yesterday. Willing to sell car as a whole car minus the gearbox which i need. Please call 0439 588 620. To be blue slipped would just need a new motor or rebuild and box. Car is a manual. Car has 18' 3 spoke rims, xforce 3.5 inch exhaust and aftermarket wing will post pic when i get home. Body is in great nick and has only slight paint imperfections.

Asking $3000 ono without gearbox but would be a cheap project for someone who already has box and motor. Considering it can be registered

Will be selling as is without box for 7 days then if no interest will be parting out the entire car if there is enough interest in the other parts. Cheers

Link to comment
https://www.sau.com.au/forums/topic/406628-syd-wrecking-s1-r33-gtst-white/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys so update. Decided i will be parting this car out. Have already sold front bar, exhaust and wheels. also im taking the gearbox front brakes and turbo (which is blown anyways). The rest of the car is complete. Interior in good nick seats and all. Ive taken a few items out already and can be picked up or posted Aus wide. here are some picks of the listed items here. Please PM or Call for prices on whatever you need, engine can be stripped as alternator, starter ect ect are still ok. Including stock intercooler and piping.

Currently striped parts include:

- GFB BOV with elbow for RB25DET model is 1001 $50

- Dash surround including aftermarket rocker switch, clock ect $60

- RB25 AFM green label with BLITZ pod filter included $60

- Turbo timer, unknown brand with wiring $20

- Pioneer headunit, MP3 ect Comes with harness to plug straight into R33 wiring $ 150

also includes the storage tray for underneath to cover hole.

331.jpg

33.jpg

Hey RB atm im trying to keep the car as a rolling shell so unfortunately the suspension stuff has to remain with the car for now as my boss needs to be able to move the thing round the shop. I will be selling the complete rolling shell once the smaller bits have been sold :)

- RHF Headlight Sold

- Exhaust Sold (Pending payment)

- Gearbox Sold

- Drivers window reg and motor Sold

- Front Brake Calipers Sold

- Wheels Sold (pending Payment)

- Front bar sold (Pending Payment)

- Alternator sold (Pending pickup)

Still plenty of goodies still available including:

- blown RB25DET Series 1 $300 Includes intake but no trubo or alternator

- Radiator good nick $50

- Condensor for AC $50

- AC compressor $100 also have 2 RB20 ones lying round

- Front seats stock $60 each or 2 for $100

- GFB BOV with elbow for RB25DET model is 1001 $50

- Dash surround including aftermarket rocker switch, clock ect $60

- RB25 AFM green label with BLITZ pod filter included $60

- Turbo timer, unknown brand with wiring $20

- Pioneer headunit, MP3 ect Comes with harness to plug straight into R33 wiring $ 150

also includes the storage tray for underneath to cover hole.

- Front Grille with Skyline S series 1 $20

- Passenger headlight $100

and many more Plenty of interest shown

hey obsesive, unfortunately i have a guy interested ina complete shell so will be needing to keep all body in tact. Plus she being parked outside so still need to lock her at this point cheers.

SOLD Items:

- RHF Headlight Sold

- Exhaust Sold (Pending payment)

- Gearbox Sold

- Drivers window reg and motor Sold

- Front Brake Calipers Sold

- Wheels Sold (pending Payment)

- Front bar sold (Pending Payment)

- Alternator sold (Pending pickup)

- Front Grille with Skyline S series 1 SOLD (Pending Payment)

- BOV SOLD (Pending payment)

- Instrument Cluster Sold

Still plenty of goodies still available including:

- blown RB25DET (broken T-Belt) Series 1 $300 Includes intake but no turbo or alternator

- Radiator good nick $50

- Condensor for AC $50

- AC compressor $100 also have 2 RB20 ones lying round

- Front seats stock $60 each or 2 for $100

- Dash surround including aftermarket rocker switch, clock ect $60

- RB25 AFM green label with BLITZ pod filter included $60

- Turbo timer, unknown brand with wiring $20

- Pioneer headunit, MP3 ect Comes with harness to plug straight into R33 wiring $ 150

also includes the storage tray for underneath to cover hole.

- Passenger headlight $100

and many more Plenty of interest shown

SOLD Items:

- RHF Headlight Sold

- Exhaust Sold (Pending payment)

- Gearbox Sold

- Drivers window reg and motor Sold

- Front Brake Calipers Sold

- Wheels Sold (pending Payment)

- Front bar sold (Pending Payment)

- Alternator sold

- Front Grille with Skyline S series 1 SOLD (Pending Payment)

- BOV SOLD (Pending payment)

- Instrument Cluster Sold

- Complete Dash Sold

- Arieal cable from headunit back Sold

- Drivers side mirror Sold

- Boot Trimmings

Still plenty of goodies still available including:

- blown RB25DET (broken T-Belt) Series 1 $300 Includes intake but no alternator or loom

- Radiator good nick $50

- Condensor for AC $50

- AC compressor $100 also have 2 RB20 ones lying round

- Front seats stock $60 each or 2 for $100

- Dash surround including aftermarket rocker switch, clock ect $60

- RB25 AFM green label with BLITZ pod filter included $60

- Turbo timer, unknown brand with wiring $20

- Pioneer headunit, MP3 ect Comes with harness to plug straight into R33 wiring $ 150

also includes the storage tray for underneath to cover hole.

- Passenger headlight $100

- All interior trimings, ask for price on which one to many to list including A pillar, Doors ect.

- Front aftermarket Door speakers Soundstream $150 pair with tweeders.

- Rear Seat $50 for the complete top/bottom set

- Fuel pump assembly stock $100

- Stock CAT good for clearing defects $50

Parts are running out the door! Better hurry :)

Shell will be up for grabs once stripped semi complete roller, registable with front and rear brakes, cradle, diff, tailshaft minus box but will include looms ect and anything else that doesnt sell. $500

Just another note, larger items like engine, seats ect need to be picked up as frieght ect is just a muck around cheers. If buyer wants to organise a courier to pick up ect that is fine. Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...