Jump to content
SAU Community

?ur Thoughts On A R34 Hiflow Turbo On A R33?

RB25 SKYLINE

By RB25 SKYLINE,
in Engines & Forced Induction

 Share

Recommended Posts

RB25 SKYLINE Experienced

RB25 SKYLINE

Posted
Posted

im in the process of gettn sum more power out of my r33 series s1 its currently making 210kw at 12psi,ive found a r34 hiflow turbo and sum 550cc denso injectors cheap.im just tryn to find out wat power it should make roughly?will it be heaps laggy compared to my stock turbo?and how much power and boost should i go for safely on a unopened engine?

i currently have:

fmic,3.5" exhaust turbo back , walbro fuel pump,turbosmart boost controller and gtr coilpacks with iridium plugs,still running stock air box with drift panel filter.

Manuel Kasko Grand Master

Manuel Kasko

Posted
Posted

I run up to 20psi on my stock engine and its going fine.

Others have run even more of course but I wouldnt push it past 22psi as a high boost setting.

The R34 highflows are good to around 250rwkw give or take 10 or so kw depending on your engine, dyno, setup etc.

It wont be laggy and you should be able to push around 18psi or something through the highflow.

Once you get into these numbers you will need a aftermarket ECU + Z32 air flow meter.

I dont know how much your injectors flow either so you might need different ones?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...