Jump to content
SAU Community

Recommended Posts

it just means that the ballast is capable of holding those different types of bulb, but what i'm saying is each bulb is different. You must use any of those bulbs listed and nothing else or it won't work. Sorry for previous post that was badly explained aha.

The socket and cable to the ballast should still b there, (socket tucked to the side).

The wiring would have been modified to eliminate the ballast altogether.

Remove halogen bulb, reconnect + & - to ballast, remove globe adapter, fit new HID bulb and you should be back to factory.

Yup looks like the one in the pic.

So all I need is the wiring and globes?

Would these fit?

http://www.ebay.com....=item27c0ff9d43

Thanks

These will not work unless you are using an aftermarket ballast, they will not plug into the factory ballast as they are hard wired.

are you sure they are different? All the ones I've found on ebay say d2r d2s and even d2c!!

http://www.ebay.com....=item27bfc22981

Even that says d2r d2s ^

I'm so confuse :(

I believe they both have the same connector which is why this harness says it will suit either, but the D2R bulb has an intergrated reflector to use in low beam applications. the D2S doesn't

Do i actually need to open my headlight units to put in any wires?

Check this out, doesn't look too hard..

http://g35driver.com/forums/body-interior-exterior-lighting-diy/264011-diy-replacing-clearance-city-fogs-hid-bulbs.html

You shouldn't need to open the headlight up.

The best way to tackle this problem is by doing some recon work first, and actually looking at what you actually have versus what you don't have.

Jack the car up, take a wheel off, remove the inner rain guard and you will have excellent access to the back of the headlight.

Pop out the top cover(globe) and inspect the setup - is the HID socket still in there and connected (to the ballast), is the ballast still bolted to the bottom of the light.

If these questions are answered with a 'YES', then all you have to do is get power to the ballast, remove the adapter plate for the halogen globe and fit some HID bulbs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...