Jump to content
SAU Community

Recommended Posts

QR JAP NATS 2012

TRACK DAY – SAT 22 SEPT – QLD RACEWAY

PLUS $1000 Top TEN SHOOT OUT

I am happy to announce this years’ Track segment of the QR JAP NATS will be hosted by Time Attack, at Queensland Raceway.

We will be running a sprint event in the morning, with trophies to celebrate the class winners at lunch time.

Then in the afternoon the top ten quickest cars will shoot out with a single lap, the quickest to win $1000 cash.

This is a RACE WHAT YOU BRING EVENT. As long as it is a Japanese car you can race, no tyre restrictions apply in any category.

CLASSES:

A: AWD CLASS

B: 2WD Naturally Aspirated

C: 2WD Forced Induction

Each entrant will receive two tickets into the gate.

The morning event will be held on the CLUBMAN TRACK with 5 sessions of 7 laps (1 warm up, 5 hot, 1 cool down).

Numbers are limited, so get in early and secure your spot with payment.

The Jap Nats event also has drift, show’n’shine and many other attractions to check out over the weekend.

To book in, email [email protected] to secure your spot now !!

EVENT ARRIVAL TIME: 7:30 AM for Check In.

Track Fees / Booking conditions

The number of drivers booked for the morning and afternoon sessions are capped. Only pre-paid places are secured.

Prepaid Bank Transfer: $195.00

There is a $40 cancellation fee. The remainder of your payment will be refunded. You must cancel at least 48 hours before the event to receive a refund.

Timing

There is a new timing system at QLD Raceway and Lakeside. To get timing you need a beacon. You can rent it on the day for $20 or buy for $80 from the office.

General

AASA License. You need an AASA license to race at either Lakeside or QR. This is with the racetrack and not Time Attack. You can purchase one on the day. $55 for the year, $25 for the day.

Lakeside does run a strict noise restriction policy. If you break the noise limit you will be parked by their staff. If you have any doubts please sort out in advance as you will not be refunded if your car is too loud.

Paul Ruzic

041 112 7374

www.TimeAttack.com.au

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/408473-qr-jap-nats-2012-22nd-september/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...