Jump to content
SAU Community

For Sale - 400Rwhp R33 Gts-T

silverbullet94
 Share

Recommended Posts

silverbullet94 Rookie

silverbullet94

Posted
Posted

Up for sale is my R33 GTS-T, I am only selling as I am getting married and need the car gone. I bought this car with a 500rwhp project in mind, it currently is running 389.8 rwhp on a safe tune at 19psi (15psi on wastegate without boost controller) as it is my everyday drive. I have just completed the 100 000k service (timing belt, new water pump etc..), service every 5000k's using Nulons. I have also just had it tuned by Pits performance (Matty Spry). There is a long list of mods/extras, I will try to list all of them: Recent respray in Nissan silver, factory sunroof (does not leak!), Series 2 front bar, Clear Nismo side indicators, GTR style side skirts and rear bar side pods, Dark window tint, 18 inch wheels, 225 front (worn on inside due to negative camber), 265 rear (80%), Lowered suspension, Full custom exhaust (with cat), Front and rear strut braces, HICAS lock out bar, Racing clutch, FMIC, Nissan Q45 throttle body, Garrett GT3572R turbo, high flowed head, Aftermarket inlet plenum, High mount exhaust manifold, Super spark coilpacks, Custom turbo inlet, Oil catch can, pod air filter, Turbosmart Fuel pressure regulator, Turbosmart BOV, Bosh 044 external fuel pump, Swirl can, custom external fuel pump and swirl pot enclosure which stops fuel vapor entering the cabin, GTR internal fuel pump, Top inlet injectors (not sure on size), Aftermarket fuel rail, Apexi AVCR, GFB external wastegate (set at 15 psi, 50mm I think), screamer pipe, Custom dump pipe from back of turbo, heat wrap/hose on dump pipe and hoses around the turbo (needs a tidy up cosmetically!) Apexi water temp and boost gauge in pillar pod (gauges are copies, they are there to fill the holes for the moment), Full Microtech LT12s computer and harness, New 4 line blue hand controller, Alpine CD player, Rockford Fosegate 6 and half splits front, 6x9 rear (not sure of brand), Interior is what you would expect for its age but still quiet tidy. This is what I can think of off the top of my head, there is a lot of work I can not list as it was completed before I bought the car (internals for example). I would be happy to explain more over the phone. I am asking $13 400 but I am negotiable as I need it gone. Thanks for looking. Nathan 0404 816 343

Link to comment
https://www.sau.com.au/forums/topic/408945-for-sale-400rwhp-r33-gts-t/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...