Jump to content
SAU Community

Recommended Posts

Red top SR20DET Long motor 100,000kms, with Loom $1200 (excluding turbo, injectors)

Have a vid of engine running and have had a compression test done

S13 Redtop ecu with Nistune $350

Garret GT3071R Turbo, .86 rear housing, 52 trim, Mint cond no shaft play $950

SARD 550cc injectors $400

SARD adjustable fuel pressure regulator, with earls fittings and adaptor $160

GENUINE Z32 Air Flow Meter $150 (no plug)

Walbro 255L/H Fuel pump $100

Can do all of the above as a full package ready to drop in for $3000, good for 240 – 250rwkw

3inch one piece dump and front pipe with O2 sensor $120

3inch stainless Fuitsubo exhaust with hi flow muffler and gutted cat $250

Turbosmart 38mm sleeper series dual port blow off valve $250

Greddy Profec B spec II Boost controller $300 ( pretty much brand new )

NEW Pod filter $50

Greddy catch can $50

DRIVELINE

Tomei 2 way diff in housing Housing ( 5 bolt ), 4.11 ratio $750

S13 gearbox 100,000kms $600

S13 manual tail shaft with centre bearing $100

S13 clutch master cylinder with slave and lines

S13 manual pedal box

Can do a deal for a full manual conversion minus clutch and flywheel

C's short shifter - $150

EXTERIOR

ORIGIN Roof spoiler $180

Crystal JDM tail lights $150

complete S13 Silvia doors – paint and trim in mint condition $120 each or both for $200

S13 boot lid, spoiler holes welded and has been re-painted mint $100

S13 rear stock bar with reo Mint $100

Windscreen good condition - $100

Rear window $100

16x8 genuine R32 GT-R alloys - $500

INTERIOR

S15 Rear seat complete $100

S13 Rear seats $20

Greddy GREX Gear knob $50

Black suede dished steering wheel $100

Bride Fixed back bucket, with drivers side rail (side mount)$400

Black Dash Mat $60

S13 dash mint condition no cracks or fading $200

S13 digital climate control with loom $100

SUSPENSION

Unkown rear strut brace $50

Tein HE coilovers front and rear with camber tops $750

Silk Road adjustable castor rods with rose jointed ends $100

5stud conversion with brakes

5 stud front hubs and bearings pressed onto S13 knuckles and uprights

R33 rear twin piston callipers(bendix Pads) with 5 stud hubs and drum brake set up

R32 BM44 brake master cylinder

R33 handbrake cable with adaptor plate

S15 front callipers with Bendix Ultimate pads, and RDA rotors

Total brake set up package: $700

S13 shell with damage! Has Walk in S,A Rego! (rego is for SR20DET) $800

all parts located in Adelaide, will post most items at extra cost

will have pictures up soon, can email/txt pics for now though

cheers

Walbro 255L/H Fuel pump $100

ORIGIN Roof spoiler $180

Crystal JDM tail lights $150

complete S13 Silvia doors – paint and trim in mint condition $120 each or both for $200

S13 boot lid, spoiler holes welded and has been re-painted mint $100

Can I get pics of these?

Cheers

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...