Jump to content
SAU Community

Recommended Posts

Hi All,

I've lost my keys and am now down to my spare set.

I managed to get replacement remote for my autowatch alarm ($40 per remote), it was easy to program.

Now I need to get the key for the car cut and from my searching on google it appears the key has a chip which will need to be programmed.

The dealer quotes me $500 or so to get 1 replacement key! Then another $100 or so to get it programmed.

I've read people using locksmits all over aus at way cheaper prices but am struggling to find one in Syd..

anyone got some contacts that can help?

Thanks

Steve!

Link to comment
https://www.sau.com.au/forums/topic/409985-v35-replacement-keys-in-syd/
Share on other sites

  • 2 weeks later...

Chris was referring to the place (ie Nissan) where the actual key is obtained.

Just Jap in Kirrawee does not stock the G35 Transponder type key; but if you wish to wait, they could get it in.

Sydney:-

Just Jap for instance stocks the R34 GT-R key for $129 - less discount for SAU Members

Abbotts Locksmiths can cut the key from either i) computer code which is most accurate or ii) your other key for $60

JapLink Motors can programme your newly cut key, so long as you bring your current key (for matching), for $20

All up cost would amount to $200

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...