Jump to content
SAU Community

Recommended Posts

CC03 Front 18x9+20 (5mm slip on) Rears 18x10+20

CC02 Front 18x8.5+19 Rears 18x9.5+15 (no problems running 9.5 all round)

DSC_0905-1.jpg

DSC_0902-1.jpg

DSC_0889.jpg

DSC_0888.jpg

DSC_0886.jpg

DSC_0899-1.jpg

DSC_0896.jpg

DSC_0894.jpg

DSC_0892.jpg

Tyres sizes on the 8.5 and the 9.5 +15?

Im keen for a set, might have to be after xmas though :(

  • 4 weeks later...

Where are they made. Steel or alloy. Cast or forged. Weight. Can you point me to the site with all the info. Thanks mate

There cast alloy. Weight for a 18 by 8.5 was around 22lbs so roughly 10kg.

Google COSMIS wheels.

We're making 19's and here is the 3D drawing of the 19x9.5

CC031995-201301171-1_zpsaa640628.jpg

We will be making the following size and offsets, currently taking per-orders due to arrive about 2-3months. We can drill to your spec and offsets and colours are Flat Black and Silver with a Polish face.

19x8.5 +22-38

19x9.5 +22-35

  • 6 months later...

Will the CC03's 18x11 +20 fit on a R34 rears and 18x9 +20 on the fronts. Guard flaring or pumping is not an issue and I'd run spacers if necessary.

Not sure on the rears, the fronts are fine. The 10's is a safer option...

No spacers required to clear the brakes, the new stock has been redesigned to clear Nissan 4 pots, and brembos. It made to clear almost all brake kits. It now even clears Evo 5-10 too...

  • Like 1

Nice, I Would also be interested in some 17's :)

If you end up getting them done.

And sorry but could anyone PM me about what pods these are!!:/

DSC_0667.jpg

Edited by Zrobe



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...