Jump to content
SAU Community

Work Vskf's 18X9" +9 (R-Disk) And 18X9.5" +14 (O-Disk) With Federal 595's

GHOSTrun
 Share

Recommended Posts

GHOSTrun Mentor

GHOSTrun

Posted
Posted (edited)

1 x PAIR of 18x9" +9 Work VS-KF's [R Disk] (82mm dish), Federal 595 215/40/18 - $1500

1 x PAIR of 18x9.5" +14 Work VS-KF's [O Disk] (107mm dish), Federal 595 225/40/18 - $1500

WORK valve stems and centre caps included.

Pickup from Toowong.

Contact Michael - 0413 504 084.

post-28547-0-08438500-1351777664_thumb.jpg

334089_10150386929728945_354783634_o.jpg

Edited by GHOSTrun
  • 2 weeks later...
GHOSTrun Mentor

GHOSTrun

Posted
  • Author
Posted

Plenty of tread left on tyres:

vskf_1.jpg

vskf_2.jpg

vskf_3.jpg

vskf_4.jpg

These are the only blemishes on the rims - two small gutter rashes on both passenger side rims, happened about a week after I bought them brand new, nearly cried. Not noticeable unless your face is 30cm away:

vskf_5.jpg

vskf_6.jpg

Pics of fitment on my s15 which has had some guard work done:

vskf_7.jpg

vskf_8.jpg

vskf_9.jpg

GHOSTrun Mentor

GHOSTrun

Posted
  • Author
Posted

An interstate buyer has offered $2700 + postage, if anyone local can better that before the week after next when the interstate buyer gets paid and can purchase, contact me now. Added more pics to 1st post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Duncan
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Duncan · Posted

      Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...