Jump to content
SAU Community

Rb25Det + Box And Tuned Ecu

fattox33

By fattox33,
in Classifieds

 Share

Recommended Posts

fattox33 Collaborator

fattox33

Posted
Posted

Just curious at this stage, my 33 is all but a write off (they aren't registering it as one but the market value isn't worth repairing it)

I have had the idea of selling out parts to recoup losses.

As such -

RB25DET:

ACL Forged pistons

Shot-peened conrods

ARP studs throughout engine

HKS Step 1 intake and exhaust cams

600CC Siemens injectors

Bigger fuel rail

Rising Rate FPR

Greddy-style manifold

Custom hand-welded piping

Polished cam covers

Brand new coolant hoses

New half-moon seals

New tappet cover gaskets

HKS head gasket

High Flowed Series 2 turbo - capable of up to 20 psi (was making 20psi but kept popping cooler hoses)

Link G4 Plugin ECU, tuned by EFI Performance. Making 212rwkw @ 13psi.

90mm throttle body

Splitfire coilpacks

Custom built Jim Berry clutch

I'm sure I've missed something here, there are a lot of bits and pieces in/on it. Selling as a whole package

Trying to gauge value for it, I'm looking into a new car and need to get as much possible toward a deposit for a newer car. I paid around $4k for the motor but have put another $5-6k into it (parts + labour though!) so I'm thinking $6k nego. You couldn't build this motor for that much!

None of the motor parts have done more than 20,000km. Mainly highway driving.

Photos can be attached. Just doing this as EOI.

Other parts from car available as well!

Will ship Aus-wide, freight can be discussed.

Motor will take up to a gt30 comfortably without any modification.

Also, have a gearbox, short shifted, looking at around $1000 but open to offers. Gearbox has done approx. 160k km

Link to comment
https://www.sau.com.au/forums/topic/413789-rb25det-box-and-tuned-ecu/
Share on other sites
fattox33 Collaborator

fattox33

Posted
  • Author
Posted

bump up, all parts currently available excluding:

alloy radiator

coilovers

(possibly) gearbox - still taking offers

one or both power window regs with motors

horn plug in area

fattox33 Collaborator

fattox33

Posted
  • Author
Posted

Also available - genuine Trust intercooler - 600x300x100 with piping to suit forward facing plenum. Piping custom handmade. $400ono.

R33 4 door seats - $100 each plus post

Engine is Series 1 RB25DET - supply with or without Link G4, offers currently in progress on ECU so if you want as a package get in quick!

Front and rear strut brace - $100 the set, post anywhere, suit 2 door possibly 4 door?

Hicas bar - $50

Rear subframe bushings - stiffen the back end up - $50 the set posted anywhere in australia

Diff - standard R33 Series 1 diff - $100

Driveshafts - $100 the set

any other parts ask away! I have most of the interior parts, as well as panels, GTR bootlid with spoiler, locks, dashboard pieces, interior trim!

Text me on 0413475969 with enquiries

fattox33 Collaborator

fattox33

Posted
  • Author
Posted

Bump up to the top - ECU available, $1300 firm.

Intake plenum, with fuel rail, 600cc injectors and 90mm throttle body - 750 firm, individually cost me 1400 all up with custom made adapter plate from greddy to 90mm throttle with some machining done.

Splitfire coilpacks, suit series 1 rb25det, near new 350 the set

Nearly all interior parts available, RB25DET wiring loom, ignitor, full loom $200, ignitor $50

Fuses needed? Ask away!

Also, I have a rear battery relocation kit available

Feel free to ask, turbo is sold however manifold, piping, genuine TRUST intercooler available

fattox33 Collaborator

fattox33

Posted
  • Author
Posted

Bump - all I have left for the moment is Trust intercooler, wiring loom, bare motor (no clutch/intake but can supply factory plenum and injectors), catch can, exhaust manifold, 3.5 inch exhaust

fattox33 Collaborator

fattox33

Posted
  • Author
Posted

BUMP BUMP BUMP

Link G4 Plugin ECU and full car wiring loom available.

0413475969

Loom $500 ono, ECU $1300 firm or as a package negotiate with me

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...