Jump to content
SAU Community

Recommended Posts

Just curious at this stage, my 33 is all but a write off (they aren't registering it as one but the market value isn't worth repairing it)

I have had the idea of selling out parts to recoup losses.

As such -

RB25DET:

ACL Forged pistons

Shot-peened conrods

ARP studs throughout engine

HKS Step 1 intake and exhaust cams

600CC Siemens injectors

Bigger fuel rail

Rising Rate FPR

Greddy-style manifold

Custom hand-welded piping

Polished cam covers

Brand new coolant hoses

New half-moon seals

New tappet cover gaskets

HKS head gasket

High Flowed Series 2 turbo - capable of up to 20 psi (was making 20psi but kept popping cooler hoses)

Link G4 Plugin ECU, tuned by EFI Performance. Making 212rwkw @ 13psi.

90mm throttle body

Splitfire coilpacks

Custom built Jim Berry clutch

I'm sure I've missed something here, there are a lot of bits and pieces in/on it. Selling as a whole package

Trying to gauge value for it, I'm looking into a new car and need to get as much possible toward a deposit for a newer car. I paid around $4k for the motor but have put another $5-6k into it (parts + labour though!) so I'm thinking $6k nego. You couldn't build this motor for that much!

None of the motor parts have done more than 20,000km. Mainly highway driving.

Photos can be attached. Just doing this as EOI.

Other parts from car available as well!

Will ship Aus-wide, freight can be discussed.

Motor will take up to a gt30 comfortably without any modification.

Also, have a gearbox, short shifted, looking at around $1000 but open to offers. Gearbox has done approx. 160k km

Link to comment
https://www.sau.com.au/forums/topic/413789-rb25det-box-and-tuned-ecu/
Share on other sites

bump up, all parts currently available excluding:

alloy radiator

coilovers

(possibly) gearbox - still taking offers

one or both power window regs with motors

horn plug in area

Also available - genuine Trust intercooler - 600x300x100 with piping to suit forward facing plenum. Piping custom handmade. $400ono.

R33 4 door seats - $100 each plus post

Engine is Series 1 RB25DET - supply with or without Link G4, offers currently in progress on ECU so if you want as a package get in quick!

Front and rear strut brace - $100 the set, post anywhere, suit 2 door possibly 4 door?

Hicas bar - $50

Rear subframe bushings - stiffen the back end up - $50 the set posted anywhere in australia

Diff - standard R33 Series 1 diff - $100

Driveshafts - $100 the set

any other parts ask away! I have most of the interior parts, as well as panels, GTR bootlid with spoiler, locks, dashboard pieces, interior trim!

Text me on 0413475969 with enquiries

Bump up to the top - ECU available, $1300 firm.

Intake plenum, with fuel rail, 600cc injectors and 90mm throttle body - 750 firm, individually cost me 1400 all up with custom made adapter plate from greddy to 90mm throttle with some machining done.

Splitfire coilpacks, suit series 1 rb25det, near new 350 the set

Nearly all interior parts available, RB25DET wiring loom, ignitor, full loom $200, ignitor $50

Fuses needed? Ask away!

Also, I have a rear battery relocation kit available

Feel free to ask, turbo is sold however manifold, piping, genuine TRUST intercooler available

Bump - all I have left for the moment is Trust intercooler, wiring loom, bare motor (no clutch/intake but can supply factory plenum and injectors), catch can, exhaust manifold, 3.5 inch exhaust

BUMP BUMP BUMP

Link G4 Plugin ECU and full car wiring loom available.

0413475969

Loom $500 ono, ECU $1300 firm or as a package negotiate with me



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...