Jump to content
SAU Community

Recommended Posts

Hey guys I have a r32 sedan MAYBE up for grabs. Now just to make a few things clear i LOVE this car to bits, I have spent 1000's on it and will not let it go cheap if no one pays or offers another car of value to me plus cash i will not seperate . My reasons for sale are

1. I want to buy a house and the only way to get the money together would be to seperate with the 32

2. I travel at least 60k to work 7 days a week and some days 120k

3. As i travel alot its not ideal (easy to speed and be a numpty in, bit bumpy as its low, defectable)

4. MONEY its a skyline while i get 400ks to a tank its always bp ultimate ran through it which adds up quite quick with all the travel

If i havent scared you off yet lets get into the good stuff.

ENGINE / RUNNING GEAR-

-S1 RB25 Conversion done before i bought it. Believed to have 130000k. Runs beautifully and has buckets of power

-Turbosmart manual boost controller, Running 11PSI of boost

-Previous owner said it was tuned to 211kw, I have no dyno sheets for proof BUT can see it does pull very hard

-Serviced every 5000k with quality nulon oils and additives , expect the gearbox and diff which runs with redline shockproof (only serviced twice in my ownership)

-Diff has just been reshimmed very tight and never singles, Only skips when pulling out of the driveway when cold

-STD turbo

-Cold air box with a pod inside

-Clutch went pop around 5000k ago replaced with extreme HD, POS rb20 box went a week later

- 80000k RB25 box conversion was put in by me. Speedo conversion done,Solid shifter bush, new slave, custom tailshaft, custom crossmember, done about 4500k

-Very large FMIC

-3'' stainless blitz exhaust sounds very tough but not over the top, also have a 4" jasma exhaust to

I feel like there is a few things im missing but a start

BRAKES / SUSPENSION / BODY

-I recently just did the brake system on the sky which included. R33 GTR slotted and cross drilled rotors up front, Slotted back, EBC Redstuff pads on all corners, new fluid and bled. The most responsive brakes i have used, they are brilliant 2 weeks old

-Shortened shocks and springs which sits very low but not ridiculous, all shocks in good nic

-20 percent window tint all round looks moist

-Paint is very fresh and is a custom respray in Mazda 3 red paint code 27a, Brilliant red which glitters in the sun

-All four guards have been rolled and flared HEAPS had 9.5 all round at one point

-Sparco ns11 wheels on atm 8.0" on front 9" at back which doesnt do the flared guards justice but suit the car well

- Tein Adjustable camber arms front and rear

-stock kit (my favourite personally)

INTERIOR AND STEREO

Interior lets this car down a bit, missing vents, slight bubble in dash suppose it is an 89 model

-Sport wheel

-33 seat (lumber support)

-Kenwood headunit with aux

-2 2000w earthquake amps one monoblock one 4 channel

-2 kenwood 1200w subs

- alpine type s splits all round with tweeters up front

Radical sound system

$12000.

Please dont tell me if you think this is overpriced, I dont car what you think as i dont want to let it go unless i get what i want I AM IN NO HURRY and as stated its a EOI. Every time i go out and see this car i smile, I just love the 4dr look and it would be an incredible shame to see it go but i would like to buy espcially while the home owner grant is around still. SA REGO BTW

post-87113-0-80387300-1354099108_thumb.jpg

Will get more photos later

  • 2 months later...

Okie dokie, some mods i forgot

So the HD clutch crapped out, Just put a Jim berry full monty clutch in rated for 350kw. Stock pedal feel with a button feeling to it if that makes sense.

-bosch 044 fuel pump

-hicas lock bar

-R33 front LCA's

-Tein Castor rods

-nolathane control arm bushes

-Rack spacers

-Cradle bushes + pineapples + cradle mods

-40mm spacers in the back now

-gtr bonnet

-Dildo shifter

Now i understand 12 is a bit steep so price drop down to 10500. My phone doesnt take a great pic but here are some snaps

Cheers buddy! Got to stop spending money on it !

Just got new

-tie rod ends

-steering rack mount bushes ( made an incredible difference)

-two front tyres fitted

-wheel aligned at the front

also found a 4" jasma exhaust in the shed as well !

Someone make an offer e.g minus sound system 10g.post-87113-0-48318300-1360827020_thumb.jpgpost-87113-0-76641800-1360827035_thumb.jpgpost-87113-0-44696500-1360827047_thumb.jpgpost-87113-0-20169700-1360827060_thumb.jpgpost-87113-0-10531100-1360827070_thumb.jpgpost-87113-0-12086800-1360827007_thumb.jpg

post-87113-0-48846700-1360827082_thumb.jpg

  • 2 weeks later...

Leaking exhaust manifold. Poo balls. I will put a new gasket, new studs, new nuts and machine the manifold within a month if all goes to plan (never does though). BUT if interested to take as is. $9500 !!! once fixed it will go back to its normal $10500

Oh and fresh 3 months SA rego went on a week ago

  • 2 weeks later...

Starting to get a bit more interest ! More so after cash as i have found a house i like, but because this is my only car/daily will defiantly trade in your vr,vs commys el,ef coons etc. Holla at me if u have a decent wad of cash plus a car to trade in as well !

Oh and on the 22nd of march an order for new cometic manifold gasket, 3" dump and front pipe, all turbo gaskets and exhaust gaskets, decat, new manifold studs and the manifold will also get machined !

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must me missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...