Jump to content
SAU Community

Recommended Posts

i have a Liebert UPStation GXT2000RT

ive had it for around a year however its hardly been used, it was used for a month on an average desktop, however i power it up every few days to keep the batterys in check, the unit is 30kg, millions of features they cost 2700$ new,

chasing around 750-800, however open to any offers- Try Me!- swap for audio/performance gear

cheers fellas

"This is a versatile, high performance UPS for network and telecommunications applications, or for the enthusiast with too many computers for a smaller UPS.

Liebert UPStation GXT, a true on-line UPS, eliminates a wide range of potential power problems: spikes, surges and extended over-voltage, noise and other transients, sags and extended brownouts, even difficult-to-track harmonics and dangerous frequency variations that are common with standby generator operation.

Ideal Applications:

Office telecommunications systems

Voicemail and E-Mail servers

LAN and WAN servers

Clustered network equipment: hubs, routers, bridges

Remote telecommunications units

Test and diagnostic equipment

Engineering network servers

Factory floor protection of microprocessor-controlled equipment

Product Features:

True on-line UPS is generator-compatible.

Up to 90 minutes of battery back-up at full load (with additional battery cabinets)

Flexible rack-mount or tower configuration

www.liebert.com/products/english/products/ netpwrpr/fndation/sl_15600.pdf

Link to comment
https://www.sau.com.au/forums/topic/41599-hardcore-ups/
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...