Jump to content
SAU Community

Td06 20G L2 Complete Turbo Setup For Rb25 (290Kw + Setup)

dori33
 Share

Recommended Posts

dori33 Collaborator

dori33

Posted
Posted

Up for sale is my complete hot side off my r33 rb25 track car. Making a very responsive 308kw on 20 psi e85 safe tune.

Has only been used for a couple of track days and in perfect condition. Upgrading to a larger setup.

What it comes with

Kando td06 20g l2 with 10 cm t3 housing vband dump flange in perfect condition. (alloy elbow has been welded to comp housing to keep heat away from joiners)

std rb25 exh manifold modified for gate provision(steam pipe used) manifold has been decked on both mating surfaces.

3 inch v band dump/front pipe to factory cat position.

15mm t3 spacer(also been decked) and extended studs

tial 44 mvr wastegate with all springs. screamer pipe included

Comes with all oil and water lines including banjo bolts to fit strait to block.

3 inch alloy intake pipe with pod filter.

manifold heat sheild, and modified std heat sheild for turbo.

can also throw in hot side cooler pipe.

Complete bolt on package for a neat and responsive 280/300+ setup. Coudnt be easier.

$1500 ono

Located vic north. 0432 363 101

img0150bmt.th.jpg

img0153lz.th.jpg

img0152wn.th.jpg

img0151mv.th.jpg

img0146rugi.th.jpg

img0155an.th.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...