Jump to content
SAU Community

Recommended Posts

Item: 2 Recaro Seats w/ driver and passenger sliding brackets (The harnesses and the fire extinguisher are not included). Brackets customed to fit the existing mounting studs/bolts used for the standard R33 GTR seats (direct fittment)

Condition: Mint, almost new, no ribs, no wears. See pictures. Will provide more pictures when removed from the GTR if desired.

Location: Adelaide

Price: $1600. I prefer not to separate. If so, each will be $900 w/ its sliding bracket. W/o the bracket, each will be $750.

Delivery: Local pick-up preferred. For Australia wide delivery, buyer should arrange its own packaging and shipping arrangments.

They are currently in my GTR. They feel little bit tight for me when I sit in them. I am going to put back the original/standard R33 GTR seats in my GTR.

post-88178-0-94464400-1357375674_thumb.jpg

post-88178-0-68086200-1357375708_thumb.jpg

post-88178-0-37132800-1357375736_thumb.jpg

post-88178-0-00061200-1357375787_thumb.jpg

post-88178-0-35413000-1357375809_thumb.jpg

post-88178-0-59623100-1357375828_thumb.jpg

post-88178-0-03035000-1357375902_thumb.jpg

post-88178-0-49243900-1357375939_thumb.jpg

post-88178-0-20584500-1357376012_thumb.jpg

post-88178-0-35652200-1357376048_thumb.jpg

post-88178-0-03886800-1357376152_thumb.jpg

post-88178-0-44251200-1357376170_thumb.jpg

post-88178-0-98553500-1357376189_thumb.jpg

post-88178-0-17063100-1357376210_thumb.jpg

post-88178-0-98839000-1357376230_thumb.jpg

Now, the seats are out of the car. Here are more pics. The fire extinguisher is not part of the deal.

They have no ribs or wears. The back sides of them hardly show any signs of scratches. They're mint.

post-88178-0-46662700-1358334007_thumb.jpg

post-88178-0-19021300-1358334060_thumb.jpg

post-88178-0-21042300-1358334092_thumb.jpg

post-88178-0-41929800-1358334164_thumb.jpg

post-88178-0-06993500-1358334198_thumb.jpg

post-88178-0-65416000-1358334234_thumb.jpg

post-88178-0-33288300-1358334287_thumb.jpg

post-88178-0-74264900-1358334415_thumb.jpg

post-88178-0-27855700-1358335224_thumb.jpg

post-88178-0-27906900-1358334704_thumb.jpg

post-88178-0-96152300-1358334455_thumb.jpg

post-88178-0-69030900-1358334750_thumb.jpg

My understanding is that these SPG3 seats were made for JDM only. I would assume they made in Japan. As a matter of a fact, I got their books and it looks like they were written in Japanese

Sorry mate they can't be made in Japan, RECARO them selves say their seats are made exclusivley in Germany and one reason is to stop fakes being produced, the only thing I can think of is they were made in Germany and mayb sent to japan office and stickered in Japanese?

They're SPG3 not SPG2. I confused myself as well.

The seats are in Adelaide at my brother-in-law's and I live in Tassie. If anyone is interested to see them, I'll have my in-law show them to you.

All pm's replied.

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...