Jump to content
SAU Community

Recommended Posts

I am not trying to mislead anyone mate.

I've tried to present all items as I accurate as I could. If not sure, I would mention it.

All you could do was to respond and said something that you thought it was included as what you are referring here and then I would understand your position.

The parts I mentioned in my message were not meant to be included for the harnesses and they were covers for the two holes which were done to my GTR to secure parts of the harnesses. They were only worth worth $18

If you want them, you can have them, no biggies.

But, all I got from you was no response at least you could've said something.

Here are the two piece metals ($18 total) that should not a big deal for anyone whether or not they should be included in the offer epsecially since your offer was less than what I was offered previously.

Best wishes mate for the harnesses you are after.

post-88178-0-85025000-1364630612_thumb.png

I have dealt with Lou before and can confirm that he is an honest member. Sometimes things do slip through the cracks. However, I also support the fact that further research could have been done prior to posting up this sale thread.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
    • Hi, I need same this wing nismo , Does anyone have one for sale?  if any one have can contact me  00966546888343
    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
×
×
  • Create New...