Jump to content
SAU Community

Rb26 Parts For Sale

piranha
 Share

Recommended Posts

piranha Enthusiast

piranha

Posted
Posted (edited)

Ok,

Got some bits i need to get rid of to make space in garage.

All parts located Hills District, Sydney

1) twin turbo set up consisting of

# -7 garret turbos (1500kms) -as new (were making 261kw at 14psi-never seen more than 14psi)

# black heat coated tomei expreme exhaust manifolds (5000kms)

# mines dump pipes

# new genuine nissan o2 sensors (1500kms) cost a fortune

$3500 don't want to seperate

2) RB26 engine block/matching cradle/brand new mahle forged pistons .5mm o/s 8.5:1 cr-coated on skirts and crown from factory

chemically cleaned/bored/honed/decked to suit mahle forgies 20thou over.

No rust at all - welsh plugs removed - very clean block in and around water jackets

Get yourself a crank and assemble it! (will throw in std rods that have been re-sized with ARP rod bolts)

$2700

3) ACL race series bearings for RB26.

Mains and big ends std size -brand new still in box/shrink wrap

$200

4) 94' model factory long drive crankshaft

Has been chemically cleaned/knock in plugs drilled and tapped for screw in plugs

Linished - std size

$750

Got a bunch of other stuff i willl update the list with.

Will do a good deal if you want multiple items.

Pics by sms or can drag out and take proper ones if keen (we all know what the stuff looks like)

Can help with local delivery (sydney)

no interested in posting or interstate

contact

Luke 0422 729 679

Edited by piranha
Link to comment
https://www.sau.com.au/forums/topic/419661-rb26-parts-for-sale/
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...