Stripping Rb20 Td05 45Mm Turbosmart Gate Turbo Set Up, Motor, 610Cc Injectors, Niztune, Gearbox Etc

[PIG747]

Hey guys, selling my rb20 set up as im doing a 25/30, motor is still in car running. turbo set up/ niztune/injectors are less then 2months old and only done 1 track day.

RB20 comp tested at 150psi across all 6, comes complete with inlet, harness, sensors, coilpacks, ignitor, good heavyduty clutch. wont come with turbo or ecu $1000 ono

RB20 gearbox has slight bearing noise but other then that its good, shifts fine no grinding. $500 ono

Kinugawa TD05H-18G, 45mm turbosmart gate welded on rear housing, screamer pipe out through bonnet but wont need much to make it point down. braided lines and fittings, heatsleeving, v-band dump/front pipe, front cooler pipe with silicon, stock exh manifold. this set up is brand new only used 1 track day, made 222rwkw on 22psi dropping to 18psi makes full 22psi 4400rpm $1500 firm for the whole lot.

6x siemens top feed 610cc injectors, only done 1 track day $600 ono

RB20 niztune (only one track day old) tuned for the mods above and z32 afm will also include the z32 afm with the sale of niz tune $750 ono

also have an exedy twin plate to suit rb26 push type, plenty of meat left on it $990 ono

peter 0407008651 (Note from the 23rd of feb till 6 march ill be overseas and phone off)

[GTScotT]

Have you got a dyno sheet for the setup?

Thanks,

[PIG747]

yes have dyno sheet, ill put it up when i get home

[PIG747]

im going to start stripping this weekend so if you want to see this set up working you got till the weekend.