Jump to content
SAU Community

Recommended Posts

Wrecking a 1998 R34 GTT Coupe. All parts are available minus the engine with ancillaries and gearbox. All parts are in good working condition unless stated otherwise.

Pick-up is from Emerald, Victoria and postage is available for items which meet Auspost size/weight restrictions.

1. Complete engine loom and computer - $250

http://i160.photobucket.com/albums/t177/Shano3000/P1040211.jpg

2. Front brake calipers and rotors, plenty of meat left on both pads and rotors - $300

http://i160.photobucket.com/albums/t177/Shano3000/P1040176.jpg

3. Rear brake calipers and rotors, plenty of meat left on both pads and rotors - $200

http://i160.photobucket.com/albums/t177/Shano3000/P1040222.jpg

4. Factory 17" wheels. Very good condition with only minor gutter rash. Tyres are 98% new Triangle, TR967, 235/45/ZR17. If you're ready for new tyres on your stock R34 GTT rims would be cheaper to buy these, then onsell your rims - $450

http://i160.photobucket.com/albums/t177/Shano3000/P1040204.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040205.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040206.jpg

5. Rear subframe with diff. Includes rear cradle, diff, drive shafts, hicas, hubs, suspension components and handbrake assembly. Rear brakes have been removed - $350

http://i160.photobucket.com/albums/t177/Shano3000/P1040224.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040226.jpg

6. 3" complete turbo back exhaust. Includes 3" Cat back exhaust with cannon muffler and silencer, 3" Cateran high flow catalytic converter and 3" bell mouth dump/front pipe. Has some scratches on the muffler and dints in the silencer. Muffler tip has been shortened. Complete bolt in system - $370

http://i160.photobucket.com/albums/t177/Shano3000/P1040184.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040185.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040186.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040187.jpg

7. Factory front bar. Structurally in good condition, paint has blemishes as shown in pictures. Middle air vents have been removed for FMIC placement - $300

http://i160.photobucket.com/albums/t177/Shano3000/P1040156.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040155.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040157.jpg

8. Factory struts, complete set - $200

http://i160.photobucket.com/albums/t177/Shano3000/P1040215.jpg

9. Factory front adjustable strut brace - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1040183.jpg

10. Excedy replacement clutch. minimal use, would estimate at 90%+ meat left on clutch plate. No scoring on pressure plate. Comes without thrust bearing - $300

http://i160.photobucket.com/albums/t177/Shano3000/P1040241.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040240.jpg

11. Flywheel. No scoring - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1040242.jpg

12. Tail shaft (Manual) - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1040154.jpg

13. Gearbox X-member - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1040195.jpg

12. Manual pedal setup with clutch slave/master cylinders and lines. Includes clutch and brake pedal for conversion - $200

http://i160.photobucket.com/albums/t177/Shano3000/P1040212.jpg

13. Power window motors. Left and right hand side (Coupe) - $100each

http://i160.photobucket.com/albums/t177/Shano3000/P1040161.jpg

14. Ignition, locks and key set. Includes ignition barrel, L+R door locks, boot lock and original factory key - $220

http://i160.photobucket.com/albums/t177/Shano3000/P1040175.jpg

15. Door shells. Painted white, locks and window motors have been removed. Glass included. Passengers door has 2 small pin dents - $100each

http://i160.photobucket.com/albums/t177/Shano3000/P1040198.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040199.jpg

16. Drivers side power window switches and surround - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1040163.jpg

17. Passenger side power window switch and surround - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1040169.jpg

18. Mirrors. Painted white. Passenger side has 2 small marks in the paint as shown in picture - $50 drivers and $40 passenger

http://i160.photobucket.com/albums/t177/Shano3000/P1040171.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040172.jpg

19. Steering rack - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1040158.jpg

20. Indicator and wiper stalks with steering lock mechanism - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1040202.jpg

21. Steering wheel with airbag. Has minor signs of wear at one leather joint - $180

http://i160.photobucket.com/albums/t177/Shano3000/P1040146.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040148.jpg

22. Dashpad with airbag set-up - $250

http://i160.photobucket.com/albums/t177/Shano3000/P1040180.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040181.jpg

23. Middle dash gauges - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1040165.jpg

24. Climate control - $120

http://i160.photobucket.com/albums/t177/Shano3000/P1040167.jpg

25. Seats. Have some minor staining which could be removed with a clean. Material has no rips or tears - $180set or $80 for each front seat and $40 for rear seats individually

http://i160.photobucket.com/albums/t177/Shano3000/P1040219.jpg

26. Factory nissan floor mats. Minimal signs of wear - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1040152.jpg

27. Front door cards and back trim set - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1040210.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040209.jpg

28. Boot trim. Complete set, one piece has 2 small tears which are unnoticeable once fitted. Comes with about 60% of plastic screws - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1040173.jpg

29. Rear spoiler. Has a scrape along drivers side edge - $50

30. Front hub assembly - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1040190.jpg

40. ABS Pump - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1040178.jpg

41. Lower control arms, LCA's - $50 each

http://i160.photobucket.com/albums/t177/Shano3000/P1040188.jpg

42. Castor rods - $40 each

http://i160.photobucket.com/albums/t177/Shano3000/P1040189.jpg

43. Jack and tool kit - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1040207.jpg

44. Complete seatbelt set - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1040218.jpg

45. Under engine cover - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1040203.jpg

46. Brake master with booster - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1040216.jpg

47. Manual gearstick surround - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1040179.jpg

48. Space saver rear tyre - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1040194.jpg

49. Factory airbox with snorkel and panel filter - $200

http://i160.photobucket.com/albums/t177/Shano3000/P1040149.jpg

50. Middle air vent and hazard light switch - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1040168.jpg

51. Passenger side Xenon headlight *DAMAGED* - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1040193.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1040192.jpg

52. Badge set. Also includes "SKYLINE" from rear bar (Not pictured) - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1040197.jpg

53. Dash cluster surround - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1040196.jpg

54. Razo turbo timer - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1040200.jpg

55. Rear parcel shelf - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1040208.jpg

56. Drivers and passengers side front inner plastic wheel guards - $40 each

57. JVC DVD headunit. Model KW-AVX710. Fits perfectly into the dash of an R34 - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1040170.jpg

Please contact me through PM here on SAU.

Edited by Shano3000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...