Jump to content
SAU Community

R34 GTT coupe - Rolling shell/ project


Recommended Posts

I have an R34GTT project that I brought many years ago.  Has original Rb25det engine and manual gearbox with HD clutch to go with it. Car had been modified and previous owner stripped aftermarket turbo and performance parts to sell car and never put back together. So engine needs stock injectors and turbo put back on (pretty sure I have all of this)  and engine and box put back into car.  Pretty sure almost everything is complete to reassemble, clean mostly complete interior car had 145,000km at the time it was taken off the road.  Needs front and rear bars painted(lower Altia kit) ,  has been stored for at least 6 years that I have owned.  Fully complied and clear title.  Being sold as Is where is.  Will be getting some pics in the next few days. From memory it had tanabe coil overs,  nismo sway bars and a few other bits and pieces that I would have forget about. Probably missing a few bits and bobs from being stored in pieces for so long. 

Want $7K on Stockies or $8k with a set of genuine 19" volk CE28 19" gold rims

but open to offers.

 car is located in Deniliqun NSW 3hrs from Melbourne,  7.5hours from Sydney,  6hours from Adelaide. 

Strictly pick up only, no delivery. Not interested in organising freight as parts are bulky. 

Judging by recent 34 prices if someone is prepared to put in the work could end up with a nice cheap genuine turbo manual GTT

These will be the next generation of collectable car like the genuine mx7 plated vl Calais turbo

I don't come on here much but pm me I'll check it over the next few weeks

Link to comment
Share on other sites

  • 1 month later...
  • 3 months later...
  • 2 months later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Euros are shitboxes man. My next car going to be a Lexus or Hyundai.
    • Maybe I used the wrong sandwich plate as well. Used one piece instead of two piece.  
    • Y'know what, after reading a topic on a 360kw build using a nistune (who ended up going LINK), im now considering a LINK over a nistune. The engine protection alone would probably be worth it. And id like to learn to tune so would be nice to have that safe guard. Which means i probably wont need a boost controller then, or the R35 MAF.  Becoming a bit of a blog now but oh wells. As mentioned previously, the goal is around 300kw, for a daily driver. Will be looking at fitting a highflow turbo or similar (something that doesnt require downpipes, manifolds etc to be changed out) when the current stock gives out or the money for it is there. 
    • Thanks guys. Are you meant to tighten the converter bolts through the starter motor hole? Think my plate between gearbox and engine is one piece. Im heading up there tomorrow.
    • Picked my tailshaft up yesterday arv!! Test fit it and because they've gone to a ford centre bearing and CV I had to modify the mounting bracket a little bit. 5mm of each side and she went up into position and fits well. It has a 1350 uni and flange on the gearbox end so it should be plenty strong!  Got stuck in this morning and started on the wiring mess. Cut out all the wires not required that go to the body connector and cut the engine harness out. Need to go through and work out which ones I need to keep and rewire into the new ecu. Should save a small amount of weight as well. I'd love to get in and rip the dash and everything out to completely remove wiring but cbf.  Next up was the power harness for alternator, starter etc. It has a few connectors from factory that run out of it. Cut it all apart and removed what was no longer required and put some new corro and taped it all back up and bolted it all back into place.  After that I worked out where I can mount the new flex sensor. Found a couple of factory bolt holes and drilled a new hole on the bracket to suit. Need to go get a few fittings and adapters tomorrow so I can keep going.   
×
×
  • Create New...