Jump to content
SAU Community

Recommended Posts

I'm swapping out my cooler kit for a larger unit. This setup would be perfect for a RB20 or RB25 with upto the 220-230kw mark.

Intercooler-mounted.jpg


The idea of this kit was to use the factory piping and stuff all cutting the car up. So it looks factory.

It conisists of:

500 x 200 x 90mm (core size) Return flow intercoler

custom pipe work to match stock piping in the guard
T bolt clamps

Silicone joiners from cooler to piping

The cooler cost me $220 last year, piping/clamps/silicone cost around $250.

I'm after $350 ono for the kit. It's near new, its black so its uber stealth and it you wouldn't even know its there. The reo will barely need to be mangled too (just a slight cut on the bottom section).

I'll try get some better pics this weekend of it all.


Located in Liverpool region, will ship at buyers expense.


Adam.

If you were using the Standard cross over piping I don't see why it wouldn't fit.

rb20det.jpg

My kit bolts up to the piping that goes through the guard. Like other return flow kits on the market.

Edited by Run-It-Hard
  • Like 1

Not 100% sure, but if it has a similar layout to how the RB25 factory cooler piping, I don't see it being too much of an issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...