Jump to content
SAU Community

R33 Dash Cluster Colour Change

33gts25t

By 33gts25t,
in Exterior & Interior Styling

 Share

Recommended Posts

33gts25t Apprentice

33gts25t

Posted
Posted

Ok so i wanted to change my dash from that pale yellow to a nice white colour to match my boost gauge and just look nicer. I bought white leds and put them in etc. When i lit it up it is actually a bright-ish blue (see pic). I took out the leds and made sure they infact light up white which they do. So i pulled the cluster apart and noticed the faces have a blue coating on the back. Is there an easy way of removing it? or has anyone ran into this problem before? Seems strange that the OEM bulbs had blue rubber things on them, the dash face was blue yet it lights up that pale yellow?

I have heard about the same thing on subarus except green. Has anyone come across this before?

pic

65913_525127610863737_1619932088_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/421110-r33-dash-cluster-colour-change/
Share on other sites
Spunky Munky Grand Master

Spunky Munky

Posted
Posted

I could be wrong, but it sounds to me that the LED's are colour-filmed so if you look at your picture, the dispursement of light is more bluer in some parts but not all. I suggest you buy new LED's and try again - no they should not have any blue film on them at all as the glass globe itself should be the colour you chosen. I personally have BLUE LED's on mine and they look great and have last over 2 years now.

Spunky Munky Grand Master

Spunky Munky

Posted
Posted

Yeah thats what i thought but i took them out and tested them and they definitely are white, atleast alot more white than what shows.

If that's the case then it's your desh...maybe someone painted them blue from the inside? Give them a clean and try again...

Hadouken Grand Master

Hadouken

Posted
Posted

i have gone through this problem. I bought one set of cheap led's (supposed white) and they lit up pale blue. Then I went and splurged on more expensive leds from aus. Boom stark white. The second set I bought are those 9 led ones.

Is yours a single big led?

THIS

002.jpg

Instead of THIS

$%28KGrHqJ,!n4E9c-jnUi4BPhbE+0jT!~~60_35

Aazzy Contributor

Aazzy

Posted
Posted

Mines exactly the same, was looking for a clean crisp white but ended up with a slightly bluey purple. It looks like the only way to change it would be to change the face of the gauges I guess. My originals also had the blue caps on them.

33gts25t Apprentice

33gts25t

Posted
  • Author
Posted

Yeah mate i do have those 9LED lights, i took them out and in the dark checked them in a number plate light holder, and they are very white. Atleast ALOT whiter than they show in the dash, the seller which sent me the leds sent me another batch which should've been slightly whiter, and they look a little less blue... Not sure what to do haha maybe white just aint going to happen. Thanks for help so far though guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      Whoops!
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      Literally looks like direct port nitrous haha
×
×
  • Create New...