Jump to content
SAU Community

Recommended Posts

2003 JDM MITSUBISHI LANCER EVOLUTION VIII GSR 6speed CT9A
250kw JDM EVO 8 GSR on eflex e85
PRICED VERY CHEAP ! 23K

CUSTOM PLATES: JDM-08U

PERFORMANCE at 4 wheels 250kw (335hp),
Dyno tuned by JEM (Just Engine Management)

4G63 ENGINE:
high flow panel air filter in standard airbox,
HKS intake hard pipe,
Tomei arms m7960 turbo, Turbosmart 1.2bar actuator,
Plazmaman hot side intercooler pipe & clamps,
SMB dump pipe and 3" front pipe,
Jasma 3" exhaust with 3" cat,
Blitz super sequential adjustable BOV plumbed back (comes with blocker to vent out),
Walbro hi flow fuel pump,
Delphi 1000cc injectors,
full 100k service done including timing belt and all seals replaced,
109,000kms (serviced every 3000kms)

RECARO INTERIOR:
Hdi dual display boost gauge,
Hdi dual stage electronic boost controller (rocket switch for extra 5% power),
razo gear knob,
touchscreen Pioneer Dvd player with pioneer speakers,
Soundstream amplifier and 12" Orion sub in pioneer box,
immobilizer alarm with turbo timer built in.

EXTERIOR:
carbon fibre vortex generator, carbon fibre spoiler,
tinted windows, window weather shields, HID xenon head lights.

DRIVETRAIN:
Heavy duty clutch, Engine torque damper,
All fluids changed including gear oils and AYC fluid,
upgraded rear diff bushes.

WHEELS&TYRES:
17" weds sport SA70 rims with lock nuts,
ralliart logo valve caps,
front 235/45/17 michelin pilot sport3 (70% tread),
rear 235/45/17 hankook ventus v12 evo (70% tread).

BREMBO BRAKES&SUSPENSION:
new Brake pads,
Tanabe lowered springs,
Fender (behind front gaurds) and sub frame braces.

CALTEX E-FLEX filling locations in Sydney
PENDLE HILL, 606 Great Western Hwy
CASULA, 646 Hume Hwy
DRUMMOYNE, 191-195 Lyons Rd
HAMILTON, 59-63 Tudor St
HEATHCOTE, 1403 Princes Hwy
MANLY, 86 Pittwater Rd
MOOREBANK, 216 Newbridge Rd
RICHMOND, 98 March St
TEMPE, 775 Princes Hwy
ERMINGTON,560-562 Victoria Rd
KIRRAWEE, 487 Princes Hwy

UNITED E85 filling locations in Sydney
Rozelle,127 Victoria Road, NSW 2039
Drummoyne, 81 - 85 Victoria Road, NSW 2047
Dee Why, 625 Pittwater Rd, NSW 2099
Minto, 8 Swettenham Road, NSW 2566

for more information regarding caltex e-flex (e85) and retail locations around Australia, go to following link:
http://www.caltex.com.au/ProductsAndServices/Pages/BioFuels.aspx

united e85 locations link:
http://www.unitedpetroleum.com.au/

Car was being used as daily driver so has minor scratches and chips but nothing major,
Average's 300km's from full tank e-flex (e85 100+ octane) before warning light comes on,
Very reliable and easy to drive daily,
8 months NSW registration,
Car can be transported interstate at buyers expense,
Advertised elsewhere, enquire for more details,
Can be inspected anytime, only for serious buyers !

Trade offers welcome.

Dyno video

post-65337-0-26427800-1362707213_thumb.jpg

post-65337-0-07319300-1362707234_thumb.jpg

post-65337-0-81924900-1362707240_thumb.jpg

post-65337-0-58503200-1362707249_thumb.jpg

post-65337-0-54212200-1362707257_thumb.jpg

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...