Jump to content
SAU Community

Recommended Posts

Hi all,

I have a 2002 model Subaru Impreza WRX for sale in WRC blue color.

The car runs beautifully and has never given me any sort of grief. This car does not choke on start up or do anything a WRX shouldn't do. It starts up quickly, first time every time.

Before I bought this car, I checked out maybe another 6 or 7 WRX's of the same model on the market at the time and this one was by far the cleanest and best running, and I have kept it that way.

I already got the RWC done this month on the 14th which is valid for 30 days, so it is still useable until the 14th of April.

The Good:
- 11 months rego
- RWC
- WRC blue color
- Brant immobilizer from factory, requires a 4-digit pin to start up, not good news for thieves
- STi sideskirts
- slimline number plates
- 3" exhaust and Apex'i panel filter, gives the car that WRX rumble everyone loves
- headunit with AUX in, and comes with an amp
- brand new tyres all around
- still have original owners manual from Subaru
- 180xxx on the clock which is very reasonable for a 10yr old car
- no oil/fluid leaks
- never been in a crash, never been stolen, no finance owing, clean title

Message me anytime on 0425 531 332 if you have any questions or want to inspect the car. I guarantee the first person who inspects and drives the car will buy it

Located in Tarneit, Melbourne's west

Thanks

*PRICE DROP* $10,999

*will trade for an s15, must have rego and rwc, must be manual, and have cash my way

post-55161-0-97223200-1364629624_thumb.jpeg post-55161-0-11565400-1364629633_thumb.jpeg post-55161-0-10272400-1364629646_thumb.jpeg post-55161-0-95801200-1364629652_thumb.jpeg post-55161-0-77129400-1364629663_thumb.jpeg post-55161-0-49227800-1364629673_thumb.jpeg post-55161-0-69199400-1364629688_thumb.jpeg post-55161-0-78806500-1364629697_thumb.jpeg post-55161-0-67105800-1364629704_thumb.jpeg post-55161-0-55277400-1364629711_thumb.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...