Jump to content
SAU Community

Gearbox Whine/grind When Changing At High Revs

Boss4door
 Share

Recommended Posts

Boss4door Rookie

Boss4door

Posted
Posted

So peeps i have an NA rb25 with a rb20det box fitted and im stumped and need help before i go ripping out the gearbox and wasting my time

pretty much when giving the car a hit at high revs (4500-6000 and further) and changing from 1st to 2nd or 2nd to 3rd during "fast" changes there is whine or a grind going into gear, but never hesitates (and yes im changing gear and using the clutch correctly)... Now if i was punching it and changed gears slowly it wont grind/whine.... If i punch it and double shuffle it still whines/grinds.... and on the odd occasion while im just cruising it will whine/grind...

The gearbox drives fine and no noise no whine or anything is heard during driving besides shifting Any ideas????

The past owner said he changed the clutch recently and its a heavy duty clutch, ive bled the clutch system numerous times at the master,splitter and the slave the adjustment is fine, the gearbox oil has been changed numerous time with quality oil and when i dropped the oil it was clean as a whistle..... Im confused to weather its the clutch or synchros..... Please help i dont have much time on my hands to much around and im ripping y hair out already!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25debt
      MAJOR FUEL ISSUES 25det neo r32

      By 25debt · Posted

      bumping this post as im still having dramas, my fuel pick up is sitting on the bottom of the tank, my pump gets a constant 13 volts through a relay, my fuel pressure holds consistently without fluttering or dropping, yet as soon as im near half a tank of fuel my car starts fuel starving and leaning out, it cant be due to g force as it never pulls hard enough before it starts breaking up, any help would be much appreciated 
    • Dose Pipe Sutututu
      Starter motor replacment teeth count.

      By Dose Pipe Sutututu · Posted

      Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • Kinkstaah
      Strange issue RB25DET wont start

      By Kinkstaah · Posted

      I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • Kinkstaah
      First time Skyline owner

      By Kinkstaah · Posted

      The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
×
×
  • Create New...