Jump to content
SAU Community

Anyone tried this Octone Solution?

meshmesh
 Share

Recommended Posts

meshmesh Mentor

meshmesh

Posted
Posted

This afternoon when picking up my car, I was asked to try a product called Broquet Fuel Catalyst, or Fuel Booster. I have heard of these things before, and the rep wanted me to try it with no obligations to buy, and see how it goes??? This little gismo steel rod looking thing sits just after the fuel filter. Apparantley the fuel runs through this steel rod which has little magic balls in it, and they charge or do something to the fuel which allows it to simulate an Octone boost, reduces exhaust temps by half, reduces fuel consumption, reduces knocking and allows you to advance timing safely. I'd heard of these before, and was a little suspicious... I mean all this sounded like the similar effect a water injection kit has..but thought so long as it does no harm I'll try it.

First thing I noticed in my GTR, when I watch my knock levels on the Power HC they seem to have dropped considerably, under hard accelleration and high boost I would max hit around 45, but I saw nothing over 35. OK so I'm thinking, luck maybe. Now I haven't driven the GTR for nearly a month, since getting the new gearbox overhaul & Ogura Twin Plate/Flywheel until I picked it up today. But I did sort of notice boost came on a little earlier than normal?? spooling started at less than 3800rpm? I thought this could be attribute to the lightened flywheel?

This boost master thingo, is also supposed to cut fuel consumption "but that's not my reason for trying it?? doh", allows you to advance timing some more etc etc?

I spoke to a mate tonight about it, and he said don't bother, telling me it leans out the mixtures, that's why you save fuel, and also said if I noticed some loss in power? which I replied "yes" I did.. the car's power felt very linear and even, not the standard ooooooh nooo here we goooooo!

So if anyone has some furthe input I'd appreciate it. Please.. no flaming and preferabbly some educated opinions.

Thanks fella's

Link to comment
https://www.sau.com.au/forums/topic/42386-anyone-tried-this-octone-solution/
Share on other sites
wreckedhead Mentor

wreckedhead

Posted
Posted

i have a friend that works at peps auto parts and he gets a lot of these dud octane booster products. but honestly i think the best is to tune your car on normal premium unleaded so you dont have the hassles of having to always add something to your fuel so you can drive it normally. but if you do want to have some fun then tune your car on c16 and your on your way. 116 octane can be a lot of fun. but at 7.50 a litre its a very expensive fuel. goood luck

meshmesh Mentor

meshmesh

Posted
  • Author
Posted

One thing that doesn't make sense is if I lean out the mixture's I should effectively have more pinging?? but this doesn't seem to be the case?? I'm buggered why. The guys from OWS Oils who gave this to me, want to meet me down at ICE, and stick the car on the dyno to see the results... I'm having nightmares already, I can hear Nigel and Gerald saying.. "Why'd you even bother" It should be interesting unless they convince me otherwise before then.

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

hey, if they pay for a free dyno run, why not??

altho if i had a GTR i don't think i'd be letting these sorts of 'pls come try my product, it's great but i don't know why no-one else is using it...' ppl sticking anything it it. Anyways, i've been sold on Roil :(, so maybe this works as well?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • LegendGTR
      EFR7670 exhaust selection RB26

      By LegendGTR · Posted

      I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • PranK
      Stock Airbox and Snorkle for RWC - VIC west

      By PranK · Posted

      Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • PranK
      Duncan's V37.......race car?

      By PranK · Posted

      This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...