Jump to content
SAU Community

Nsw: 1997 Mitsubishi Lancer Mr, Great First Car Or Run Around.

Run-It-Hard
 Share

Recommended Posts

Run-It-Hard Veteran

Run-It-Hard

Posted
Posted

IMG_6569_zps7ef77379.jpg

IMG_6571_zps80214938.jpg

IMG_6572_zps72420ea1.jpg

The time has come for our humble Lancer to go to a new home. It has been a great run around for nearly 2 years now. But we are looking to purchase a wagon.

So here's a quick run down on it:

1997 Lancer MR
1.8 litre engine, only the MR came with this engine.
5 speed manual
19xxxxkms
15 inch Nemoto mesh wheels
1 month old tyres
BC Coilovers
JVC headunit
Poineer sub and amp
6 months registration
full log book up to 150,000kms

IMG_6582_zps548c6b18.jpg

Great reliable car, has never missed a beat. Recently serviced (uses Castrol Magnatec 10-40w). Purchased off a close friend who had no issues with it either. Has been awesome.

IMG_6574_zpsaa87d6ca.jpg

There are some scratches and dings present, typical for a car it's age. The paint work is in great condition and would look like new with a good detail/buff.

IMG_6587_zpsc409a309.jpg

IMG_6588_zpsadb485d6.jpg

Interior is top notch, no cracks, missing panels, rips or tears in the fabric etc. It's like new.

IMG_6590_zpsf880e24b.jpg

We have a few spares that will come with the car, like standard wheels, suspension, steering wheel and we even have a tow bar for it. I believe it's rated to 500kg.

It has roughly six month registration too.

IMG_6594_zps7e926838.jpg

We are willing to let the car go for $5000 or nearest offer. We are not interested in trades/swaps nor stripping parts off the car. Please don't contact me expecting this.

We are located in Liverpool region, Western Sydney.

To organise an inspection, you can contact me on zero41zero651989. I work 11am-7pm shifts weekdays so you can call and leave a message if I don't answer, or send me a text (much easier for me to reply via text during these times).

Thanks,

Adam.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...