Jump to content
SAU Community

R/c Traxxas 1/16 Slash 4X4 Truck,velineon Brushless + Hopups, Hitec Servo + 2X Lipo Batteries

G4orce

By G4orce,
in For Sale (Other Items)

 Share

Recommended Posts

G4orce Veteran

G4orce

Posted
Posted (edited)

Up for sale is a used Traxxas 1/16 SLASH 4x4 VXL Brushless in very good condition, Powered by the Powerfull Vxl 3m Velineon Water proof Brushless System Wheelies on Demand!, Can reach over 80kmh with the right gearing.


Hop ups include Traxxas Rick Huseman Painted Fabtech Body, Hitec Metal gear Servo, Esc has a custom dual deans connector so you can connect 2 x lipos at the same time , 2 x Lipo battery's 7.4v 1500mah Turnigy Nanotech 25- 50 c High discharge rating only used 2 cycles. Because the esc is wired parallel connecting 2 of the lipos you get 3000mah of run time which is about 50 minutes of fun depending how you drive. (you dont need to run both lipos at the same time if you dont want to).
Tyres have allot of tread left, wheels have been sprayed black, gearing is 23 pinon 45 spur, recently changed shock oils to 40wt, Fly sky 2.4ghz radio with failsafe - great range.


Price $320 for the lot and can also include a Lipo balance charger for an extra $20.

Reason forsale is im selling all my 1/16 sale traxxas rc cars.

Pick up from Glenroy - Melbourne (North Western Suburbs or can post Australia wide for an extra $20

call or txt 0422756270


kG0nDm8l.jpg
8Uj8VOll.jpg
eTLEFSyl.jpg
jqriwakl.jpg
LDDz1asl.jpg
xsco4xkl.jpg
N6slYIFl.jpg
QzVDzyXl.jpg

Edited by G4orce
  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
×
×
  • Create New...