Jump to content
SAU Community

Recommended Posts

Hey guys..

Check this website http://www.toprpm.com/

It has some cars from The united Arab Emirates..

They've got some kool cars, and fast ones too...

There Drag Racing scene is improving execptionally quickly...

They only had a drag strip 1.5 years ago... and now they have more than 2 Gtrs in the 8sec bracket.. and much more following them very closely...

This is a video of a road registered R32 GTR, with HKS 2.8L engine, 6 speed HKS gearbox...

http://www.toprpm.com/eng/videos.htm

i will keep u posted with some crazy videos of some race events in the UAE..

Have fun

Link to comment
https://www.sau.com.au/forums/topic/43081-hks-28l-gtr32-in-dubai/
Share on other sites

thats the reason a lot of the dogboxes here get wasted ;)

i dont think any GT-R's can get to the 8 sec yet, there is a Z that made it to the 9 sec, but i didnt see any faster. One of the problem is that the tarmac at the drag strip is you average road tarmac, the cars lose a lot of time in the 60ft . also it is usually very dusty there, you can actually see the dust coming of the track as the cars move on, hehe.

Hello Bro.. Mazinger

Thanx for correcting me...

i ment to say gtrs are in 9 sec.. bracket.. and others following closely..

but not too far untill we see the 8 secs.. on gtrs over there..

in my underestanding.. the fastest road registered GTR on street legal tires...

is Reece McGregor White R32.. in New Zealand..

it did 8.2# qarter mile lately...

now thats fast guys...

Hey guys..  

Check this website http://www.toprpm.com/  

It has some cars from The united Arab Emirates..  

They've got some kool cars, and fast ones too...  

There Drag Racing scene is improving execptionally quickly...  

They only had a drag strip 1.5 years ago... and now they have more than 2 Gtrs in the 8sec bracket.. and much more following them very closely...  

This is a video of a road registered R32 GTR, with HKS 2.8L engine, 6 speed HKS gearbox...  

http://www.toprpm.com/eng/videos.htm  

i will keep u posted with some crazy videos of some race events in the UAE..  

Have fun

theres 32/33/ and 34 gtr `s on that web site all left hand drive.....thats the first i`ve seen

He heee....

This sound from the box.. is normal... cause it was new when fitted....

so the person still did not get used to it.. plus he has a triple plate clutch...

the video i guess, was just a demonstration of the 6 speed box, he didnt go hard out at it..

BUT anyways.... the car is kool :P

ciao

I think Dee on the SDU forums has posted up that video, saying it was a customer of his in Malaysia? Also has a few more vids of his posted up which you might want to link to as well *cough* in Dubai.

http://forums.skylinesdownunder.co.nz/show...&threadid=35424

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If your tuner can't make the car idle like factory, I'd get a new tuner. These injectors are fantastic and I'd have very serious concerns about a tuners skill set if they couldn't get them to idle well. 
    • It's highly likely you will find something. Alternatively, a quick design and order online from chaina and you'll have a perfect solution
    • Idle Lambda target is off by .4 but I reckon the VE table is not correct. If my tuner has no issue using these injectors I will keep them, they are good quality after all
    • I already have an Apexi. Just wondering if it is worth putting in something new since the Apexi is likely well over 10 years old, if not 15. I know the injectors work but they already run at less than rated fuel pressure to make them work properly and idle is basically 1% duty cycle or less. Could be better
    • Nice, I would never have thought in that direction. The actual motor is a cylinder....I wonder if there are any cylindrical heat sinks with the right ID  (and if there is clearance to other components). I think adding airflow is still a thing as well....will check it all out next time it is in the air. Wish I had a hoist...
×
×
  • Create New...